Video

The disc revolves, but no image or bad quality images is displayed.

Timer Recording

Timer lamp flickers.

Checkpoint 1 Check there is enough space in the

Checkpoint 1

Checkpoint 2

Checkpoint 3

Checkpoint 4

Be sure that the Video Setting is properly set. (See pages 40~41)

Check whether there is damage to or any foreign material on your disc.

Some low quality discs may not play properly.

If scenes change from dark to bright suddenly, the screen may shake vertically temporarily, but this is not a fault.

disc or HDD for recording.

Checkpoint 2

Check whether the current disc is

 

recordable or not.

Make sure to check before the start time of recording.

Timer recording does not work properly.

Checkpoint 1 Re-check the recording time and the end time settings again.

Checkpoint 2

Recording will be cancelled if the

 

Sound

power is interrupted due to a power failure or another similar reason while recording.

No sound.

Checkpoint 1

Are you watching a programme in slow or skip mode?

HDMI

No HDMI output.

If you are playing a programme at a speed other than normal speed, sound will not be heard.(except for forward search (Fast 1) in disc.)

Checkpoint 1

Checkpoint 2

Check whether the mode is stop mode or not. You can switch HDMI mode in stop mode.

Check the Video output is HDMI

Checkpoint 2

Checkpoint 3

Checkpoint 4

Check the connections and settings. (See pages 22~23, 38~39)

Check whether the disc is damaged. Clean the disc, if necessary.

Check whether the disc is inserted

Checkpoint 3

Checkpoint 4

enabled.

Check the connection between the TV and the HDMI jack of the HDD &

DVD RECORDER.

See if your TV supports HDMI.

correctly with the label facing up.

Abnormal HDMI output screen.

No audio output.

Checkpoint 1 Check whether you have selected the correct digital output options in the Audio Output Options menu.

(See page 38~39)

 

 

 

 

 

 

 

 

 

 

Checkpoint 1

If snow noise appears on the screen,

 

 

it means that TV does not support

eferenceR

 

HDCP (High-bandwidth Digital

 

Content Protection).

HDMI output Jitter

 

 

 

 

 

 

 

 

 

 

 

 

Checkpoint 1

Check your TV system setup

 

 

 

correctly.

 

Please refer to the user’s manual of

Checkpoint 2

your TV.

 

English - 123