Connecting & Setting Up

Antenna + HDD & DVD RECORDER + External decoder box + TV

If you connect external decoder box to HDD & DVD RECORDER, you can record scrambled channels (CANAL+or Premiere broadcasts) received through the built-in TV tuner in HDD & DVD RECORDER.

Wall

1

3

DECODER

4

2

1.Connect RF antenna cables as shown.

2.Connect the AV1 connector on this recorder to the SCART AV connector on TV using a SCART cable.

3.Connect the AV2 connector to a SCART AV connector on decoder box.

4.To watch or record PAY-TV Canal Plus programmes, set your HDD & DVD RECORDER to receive the channels using the on-screen display.

(Refer to pages 30~32)

Other type of connecting the Video output cable

There are several ways to output video signal not using scart cables. Select one of the following video connecting that best suits you below.

•Case 1 : Connecting to a Video (Composite) output jack

•Case 2 : Connecting to an S-Video output jack

•Case 3 : Component Video output jacks

S-Video, Component video and Progressive Output Modes

•S-Video and Component video output are available only if your TV supports S-Video input or Component video input, respectively. If S-Video or Component video output does not work, check the TV connections and the TV input selection settings.

•Compared to standard interlaced video, progressive scan doubles the amount of video lines fed to your TV, resulting in a more stable, flicker- free, clear image than interlaced video.

This is only available with TVs that support progressive scan.

•Progressive Scan Output (576p)

Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture, in case of 576 progressive scan picture problems, It is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding our TV set compatibility with this model 576p HDD & DVD RECORDER, please contact our customer service centre.

20 - English