onnecting & Setting Up

Connecting HDMI/

DVI to a TV

If your TV has a HDMI/DVI input, connect HDMI/DVI Adapter cable to a TV. You will enjoy the best quality images and sounds.

•Case 1 : Connecting to a TV with HDMI Jack

•Case 2 : Connecting to a TV with DVI Jack

Case 1 : Connecting to a TV with HDMI Jack

• Using the HDMI(not supplied) cable connect the HDMI

OUT jack on the rear of the HDD & DVD RECORDER

to the HDMI IN jack of your TV.

Case 2 : Connecting to a TV with DVI Jack

•Using the DVI Adapter Cable(not supplied), connect the HDMI OUT jack on the rear of the HDD & DVD RECORDER to the DVI IN jack of your TV.

•Using the audio cables, connect the AUDIO

(red and white) OUT jacks on the rear of the HDD

&DVD RECORDER to the AUDIO (red and white) IN jacks of your TV. Turn on the HDD & DVD RECORDER and TV.

•Press the input selector on your TV remote control until the DVI signal from the HDD & DVD RECORDER appears on your TV screen.

■To use HDMI cable (not supplied), make the

C

• Press the input selector on your TV remote control until

the HDMI signal from the HDD & DVD RECORDER

appears on your TV screen.

CAUTION

Audio/Video connection before plugging in the power cord or after finishing the “Plug & Auto Setup.”

Do not connect the HDMI cable while the “Plug & Auto Setup” is progressing.

■Progressive scan automatically activates when HDMI is connected.

■If your TV does not have Bitstream decoder, you must set the digital audio output to PCM in order to watch through the HDMI output.

(See pages 38~39)

■Depending on the HDMI device (TV/HDMI Receiver) you use, audio may not be supported. If TV/HDMI Receiver does not support Dolby digital, Audio output is not available when you set Digital output as 'Bitstream' in Audio setup menu. In this case, set the digital audio output to PCM. If TV/HDMI Receiver does not support DTS, Audio output is not available when you play disc in DTS format.

■You can switch from the HDMI output to other output only in stop mode.

24 - English