Connecting the

Additional connections

HDD & DVD RECORDER

 

You can connect your HDD & DVD RECORDER to the television using the SCART cable if the appropriate input is available on the television.

1.Connect the RF cable as shown.

2.Connect one end of the SCART cable to the AV1 socket on the rear of the HDD & DVD RECORDER.

3.Plug the other end into the appropriate connector on the television.

4.Plug in the HDD & DVD RECORDER and TV

5.Turn on the HDD & DVD RECORDER and TV.

6.Press the INPUT SEL. button on your TV remote control until the Video signal from the HDD & DVD RECORDER appears on the TV screen.

< DVD-HR733 >

You can connect your HDD & DVD RECORDER to a satellite or digital tuner.

external device (VCR/Satellite receiver)

< DVD-HR733 >

Up Setting & onnectingC

To RF IN

2

1

To TV

3

RF Cable

To ANT INPUT

■The RF cable connection of this product sends only signals of TV. You must connect SCART

NOTE

cable or Audio/Video cables to watch a DVD from your HDD & DVD RECORDER.

■TV mode : Press the TV/DVD button on remote control, then “TV” appear on Front LED display (or turn off HDD & DVD RECORDER). Then you can watch programmes received through TV.

- DVD mode

1.Connect the AV2 connector of HDD & DVD RECORDER and VCR/Satellite receiver or digital tuner using a SCART cable.

2.Connect the AV1 connector to the SCART AV connector on TV.

3.Turn on the HDD & DVD RECORDER, VCR/Satellite receiver or digital tuner and TV.

4.Set Input mode on AV2.

- TV mode

1.Press the TV/DVD button on remote control,then “TV” appear on Front LED display. (or turn off

HDD & DVD RECORDER.)

2.You can watch programmes from a satellite or digital tuner connected to this HDD & DVD RECORDER, even when the HDD & DVD RECORDER is turned off.

English - 19