Discs that cannot be played

•DVD-Video with a region number other than “2” or “ALL”

•12cm 2.6 GB and 5.2 GB DVD-RAM

•3.9 GB DVD-R Disc for Authoring.

•DVD-RAM/-RW(VR mode) not recorded following the Video Recording Standard

•Unfinalised DVD-R,unfinalised DVD-RW(V mode) recorded on other equipment.

•DVD-ROM/PD/MV-Disc, etc

•CVD/CD-ROM/CDV/CD-G/CD-I

 

■ This HDD & DVD RECORDER can only operate

 

with discs that are compatible with DVD-RAM

NOTE

Standard Version 2.0.

 

■Playback and/or recording may not work for some types of discs, or when specific operations, such as angle change and aspect ratio adjustment, are being performed. Information about the discs is written in detail on the box. Please refer to this if necessary.

■Do not allow the disc to become dirty or scratched, finger prints, dirt, dust, scratches or deposits of cigarette smoke on the recording surface may make it impossible to use the disc for recording.

■DVD-RAM/-RW/-R discs may not be able to play on some DVD players, depending on the player, disc and the condition of the recording.

■Discs with NTSC programmes recorded on them cannot be played and recorded using this product.

Playing a Disc

1 Press the OPEN/CLOSE button.

 

 

 

Place a disc gently into the tray with the disc’s

 

 

2 label facing up.

 

 

 

 

 

 

 

 

 

 

 

3

Press the OPEN/CLOSE button to close the disc tray.

 

• Your HDD & DVD RECORDER closes the disc

 

 

 

tray and plays the disc automatically.

 

 

 

• The HDD & DVD RECORDER does not play discs

 

 

 

automatically after being powered on initially.

 

 

 

• When the HDD & DVD RECORDER is powered

 

 

 

on and a disc is in the tray, the unit will be

 

 

 

activated and wait in stop status.

 

 

 

• Press the PLAY(

) button to start playback.

 

 

 

• If you want the unit to play automatically when it

 

 

 

is powered on with a disc in the unit, power on

 

 

 

with the PLAY(

) button.

 

 

 

 

 

 

 

4 Press the STOP(

) button to stop playback.

 

laybackP

 

 

 

 

 

 

 

 

 

■ When you stop playing back a disc, the HDD & DVD

 

 

 

 

 

RECORDER remembers where you stopped, so

 

 

 

 

 

NOTE

 

 

when you press PLAY(

) button again, it will pick

 

 

 

 

 

 

 

 

 

up where you left off. (Unless the disc is removed or

 

 

 

the HDD & DVD RECORDER is unplugged, or if

 

 

 

you press the STOP(

) button twice.)

 

 

 

 

 

 

 

 

 

 

 

 

■ Do not move your HDD & DVD RECORDER

Caution

while playing, as this may cause damage to

the disc.

 

■Make sure to press the OPEN/CLOSE button to open or close the disc tray.

■Do not push the disc tray while it is being opened or closed, as this may cause a product malfunction.

■Do not place foreign materials on or in the disc tray.

■Some functions may perform differently or be disabled depending on the disc type. If this occurs, refer to the instructions written on the disc case.

■Be especially careful that children's fingers are not caught between the disc tray and the tray chassis when it closes.

■You must only insert one DVD disc at a time. Inserting two or more discs will not allow playback and may cause damage to the HDD & DVD RECORDER.

English - 47