Copying from a Camcorder

You may control the Camcorder using the IEEE1394 (DV) interface.

1

Connect the DV output jack of your camcorder to the

DV input jack on the front of your HDD & DVD

RECORDER using a DV cable.

 

 

 

 

 

2

Press the HDD or DVD button.

 

 

 

 

If you select DVD, press the OPEN/CLOSE button and

 

 

place a recordable disc on the disc tray. Press the

 

 

OPEN/CLOSE button to close the disc tray. Wait until

 

 

LOAD disappears from the front panel display.

 

 

 

3

Press the REC MODE button repeatedly to select

the recording speed(quality).

➞ SP ➞ LP ➞ EP ➞ XP

Record Mode SP(35:12)

4

Press the INPUT SEL. button to select DV.

If the input is set to DV, a playback/record menu that

 

enables camcorder control appears on the top of the

 

screen.

 

 

 

 

DV

 

 

 

 

 

 

 

 

 

The DV device is connected

 

 

 

 

 

 

 

 

 

MOVE

RETURN

 

 

 

 

 

 

 

 

 

 

 

 

Select the Play (√) icon on the upper part of the

5 screen to playback the camcorder and find the

 

starting position to copy.

 

 

 

 

 

 

6

To start recording, use the œ√buttons to select

Record ( ● ) icon in the top side of the screen, then

press the OK button.

You can press the REC button of the remote control to start recording.

- To stop recording -

Press the STOP ( ) button to stop or finish a recording in progress.

•When using DVD-RW/-R discs, the message “Updating the information of disc. Please wait for a moment” is displayed.

■ To display playback related icons on the

NOTE

screen, press any direction button on the

remote control.

 

ecordingR

English - 81