Samsung DVD-HR750 DVD-HR750/AUS, DVD-HR750/EUR, DVD-HR750/XEC, DVD-HR750/XEH DTS, DRC, NICAM, V-ModeCompatibility, This is only active when a Dolby Digital signal is detected

HDD & DVD RECORDER						Audio
HDD
	Library	Digital Output			: PCM
Timer Record		DTS		Off
Disc Manager		DRC		On
		NICAM			: On
	Setup	V-Mode Compatibility			: Off
mMOVE	sSELECT		rRETURN			eEXIT

HDD & DVD RECORDER						Audio
HDD
	Library	Digital Output			: PCM
		DTS			: Off
Timer Record
Disc Manager		DRC		Off
		NICAM		On
	Setup	V-Mode Compatibility			: Off
mMOVE	sSELECT		rRETURN			eEXIT

DTS

•Off : Doesn’t output DTS signal. Select this when your AV receiver (or AV amplifier) does not have DTS decoder.

•On : Outputs DTS Bitstream via digital output when you play DTS track. Select this only when your AV receiver (or AV amplifier) have DTS decoder.

M When DTS soundtrack is played, sound does not output from AV Audio Output.

DRC

This is only active when a Dolby Digital signal is detected.

•On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

•Off : You can enjoy the movie with the standard Dynamic Range.

Setup ystemS

HDD & DVD RECORDER					Audio
HDD
	Library	Digital Output		: PCM
		DTS		: Off
Timer Record
		DRC		: On
Disc Manager
		NICAM		Off
	Setup	V-Mode CompatibilityOn
mMOVE	sSELECT		rRETURN		eEXIT

HDD & DVD RECORDER						Audio
HDD
	Library	Digital Output			: PCM
		DTS			: Off
Timer Record
		DRC			: On
Disc Manager
		NICAM			: On
	Setup	V-Mode CompatibilityOff
				On
mMOVE	sSELECT		rRETURN			eEXIT
HDD & DVD RECORDER						Audio
HDD
	Library	Digital Output			: PCM
		DTS			: Off
Timer Record
		DRC			: On
Disc Manager		NICAM			: On
	Setup	V-Mode Compatibility			: On
		Audio Selection		Dual L
				Dual R
mMOVE	sSELECT		rRETURN			eEXIT

NICAM

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound by setting NICAM on or off.

•On : NICAM mode

•Off : Only set at this position to record the standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions.

V-Mode Compatibility

This feature is about the setup for selecting audios when recording the NICAM STEREO (Multi-audio) broadcasting on HDD. It does not affect to the direct DVD recording of a programme.

•Off : Both “Dual L” and “Dual R” of the multi-audio broadcasting are recorded on HDD. Titles recorded on HDD under such setup status cannot be copied to DVD-R or DVD-RW (V mode).

•On : Either “Dual L” or “Dual R” of the multi-audio broadcasting is recorded on HDD. Titles recorded on HDD under such setup status can be copied to DVD-R or DVD-RW (V mode). “Dual L” and “Dual R” options can be selected from “Audio Selection.”

English - 31