System Setup

Press [Yes] to confirm Interlace scan mode. Otherwise, press [No].

Yes No

◆Canceling the Progressive scan

1.With the unit in Stop mode, press the P.SCAN button on the front of the HDD & DVD RECORDER.

The message “Press [Yes] to confirm Interlace scan mode. Otherwise, press [No].” will appear.

2.Press the ◄►buttons to select Yes, and then press the OK button.

3.Set your TV to Interlace input (using the TV remote control.)

MDo not press the P.SCAN button if you are using a TV that does not support Progressive mode as nothing will be displayed on the screen.

If you press the P.SCAN button by mistake when your TV does not support Progressive mode, the mode will then need to be released. To release the Progressive mode, press the P.SCAN

button on the front panel 3 times. The screen will recover after the PSindicator on the front panel display turns off.

English - 34