Samsung DVD-M301 manual Troubleshooting, Specifications, General, Audio

Troubleshooting

Before requesting service (troubleshooting), please check the following.

Problem			Action	Page
No operations can be		•	Check the batteries in the remote. May need replacing.
		•	Operate the remote control at a distance of no more than 20 feet.
performed with remote.					P4
		•	Remove batteries and hold down one or more buttons for several
			minutes to drain the microprocessor inside the remote to reset it.
			Reinstall batteries and try remote again.
Disc does not play.		•	Ensure that the disc is installed with the label side facing up.		P7
		•	Check the region number of the DVD.
5.1 channel sound is not		•	5.1 channel sound is reproduced only when the following conditions
being reproduced.			are met. :
			1) The DVD player is connected with the proper amplifier
			2) The disc is recorded with 5.1 channel sound.		P12
		•	Check whether the disc being played has the “Dolby 5.1 ch” mark on
			the outside.
		•	Check if your audio system is connected and working properly.
		•	In a SETUP Menu, is the Audio Output set to Bitstream?
The	icon appears on	•	The features or action cannot be completed at this time because:
screen.			1. The DVD’s software restricts it.
			2. The DVD’s software doesn’t support the feature (e.g., angles).		P15
			3. The feature is not available at the moment.
			4. You’ve requested a title or chapter number or search time that is
			out of range.
Disc Menu doesn’t appear.		•	Check if the disc has a Menu.		P29~30
Play mode differs from the		•	Some of the functions selected in the Setup Menu may not work		P29~34
Setup Menu selection.			properly if the disc is not encoded with the corresponding function.
The screen ratio cannot be		•	The Screen Ratio is fixed on your DVDs.		P34
changed.
No audio.		•	Make sure you have selected the correct Digital Output in the Audio		P33
			Options Menu.
Forgot password		•	Press power on from a cold start with no disc in the unit. Press the STOP
			and PLAY buttons simultaneously on the front panel for three seconds. The
			Select Menu Language display will appear. Select the desired language
			button. Press the SETUP button on the remote control to select the Parental		P32
			Mode. The Parental Mode is now unlocked as indicated on the display.
			Press the DOWN button to select Parental. Press ENTER and the Create
			Password display will appear. You can now set your rating level and
			change your password to a new number.
If you experience other		•	Go to the contents and find the section of the instruction book that
problems.			contains the explanations regarding the current problem, and follow
			the procedure once again.
		•	If the problem still cannot be solved, please contact your nearest
			authorized service center.

			Specifications
	Power Requirements	AC 120 V, 60 Hz
	Power Consumption	15 W
General	Weight	6.2 lbs
	Dimensions	W 16.9 in x D 9.4 in x H 3.1 in
	Operating Temperature Range	+41°F to +95°F
	Operating Humidity Range	10 % to 75 %
	DVD	Reading Speed : 11.45 ft/sec.
	(DIGITAL VERSATILE DISC)	Approx. Play Time
		(Single Sided, Single Layer Disc) : 135 min.
Disc	CD : 5"	Reading Speed : 3.9 to 4.6 ft/sec.
	(COMPACT DISC)	Maximum Play Time : 74 min.
	CD : 31/2"	Reading Speed : 3.9 to 4.6 ft/sec.
	(COMPACT DISC)	Maximum Play Time : 20 min.
	VCD : 5"	Reading Speed : 3.9 to 4.6 ft/sec.
		Maximum Play Time : 74 min. (Video + Audio)
	Composite Video	1 channel : 1.0 Vp-p (75 Ω load)
Video	Component Video	Y : 1.0 Vp-p (75 Ω load)
		Pr : 0.70 Vp-p (75 Ω	load)
Output		Pb : 0.70 Vp-p (75 Ω	load)
	S-VIDEO	Luminance Signal : 1.0 Vp-p (75 Ω load)
		Chrominance Signal : 0.286 Vp-p (75 Ω load)
	2 Channel	L(1/L), R(2/R)
Audio	*Frequency Response	48 kHz Sampling : 4 Hz to 22 kHz
		96 kHz Sampling : 4 Hz to 44 kHz
Output	*S/N Ratio	110 dB
	*Dynamic Range	100 dB
	*Total Harmonic Distortion	0.004 %
		*: Nominal specification

•Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

•Weight and dimensions are approximate.

36 37