reference
Firmware upgrade
Introduction
Upgrading the Firmware will keep your DVD player up to date.
The latest firmware version for this unit is provided on the Samsung Website.(www.samsung.com).
How to make an upgrade disc
You must burn the latest firmware version onto a blank
1.You have to download a new file through Samsung's Download Center. (www.samsung.com).
2.Write the file to Disc using the
Note
The CD should be burned following specs below.
-File System
-Character set ISO 9660.
-The burned CD has to be Finalized.
-Please burn the CD at a low speed.
Upgrade procedure
1.Open the disc tray of your DVD-P190.
Place the burned disc on the tray. Close the tray. The Firmware upgrade screen will appear.
Firmware upgrade
menu appears
2.Press the √/® buttons to select Total, then press the ENTER button.
Firmware upgrade starts
-During the firmware upgrade process, the tray will open.
Please remove the disc and wait for about 2 minutes.
-If the DVD player was successfully updated, the disc tray will close and the unit will turn off and on.
When the unit turns on, the Select Menu Language screen will appear.
3.Press the number buttons to select the desired language.
English
Français
Deutsch
Español
Italiano
Nederlands
Note
-If the “Select Menu Language” doesn’t appear, please contact Samsung Customer Service. (see page 49)
-Do not press any button or unplug the power cord during the upgrade.
-The upgrade procedure may change, refer to the web site (www.samsung.com).
46_ reference
