Samsung DVD-P355B/XEU, DVD-P355B/XEH, DVD-P355B/XEG Chapter, Choosing a Connection, Connections

Operating Instructions

Chapter 2

C O N N E C T I O N S

Choosing a Connection

The following shows examples of connections commonly used to connect the DVD player with a TV and other components.

Before Connecting the DVD Player

-Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.

-Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.

Connecting to a TV (SCART)

-Using the SCART, connect the SCART (EXT) terminal on the rear of the DVD Player to the SCART(IN) terminal of your TV.

-If your TV is not equipped with a SCART you can select one of the following alterative connections:

Connection to a TV (Video CVBS)

1

Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN terminals of your TV.

Connections

2

Turn on the DVD player and TV.

RED

RED

3

Press the input selector on your TV remote control until the

Video signal from the DVD player appears on the TV screen.

Note

WHITE YELLOW

Audio Cable Video Cable

WHITE YELLOW

-Noise may be generated if the audio cable placed too close to the power cable.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 15 to 16)

-The number and position of terminals may vary depending on your TV set. Please refer to the user's manual of your TV.

-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the DVD player.

ENG-11

12-4 Samsung Electronics