Connection to a TV (Interlace)

-Connecting to your TV using Component video cables.

-You will enjoy high quality and accurate color reproduction images. Component video separates the pic- ture element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals are delivered through the audio output.)

1

Using component video cables (not included), connect the

COMPONENT VIDEO OUT terminal on the rear of the

DVD player to the COMPONENT IN terminal of TV.

English

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.

3

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

 

 

 

 

RED

BLUE

GREEN

 

 

RED

 

WHITE

 

 

 

 

 

Audio Cable

 

 

 

 

 

 

 

Component cable

RED

WHITE

RED

BLUE

GREEN

(not included)

 

 

4

Set the Video Output to I-SCANin the Display Setup menu. (See pages 27)

Note

-If Video output is incorrectly set to S-Video, with the Component cables connected, the screen will turn red.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 13 to 14)

-The component terminal of TV can be marked by “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y” depending on the manufacturer. The number and position of terminals can vary depending on the TV set. Please refer to the user's manual of the TV.

11

Page 11
Image 11
Samsung DVD-P365/AFR, DVD-P365/XEC manual Connection to a TV Interlace