Samsung DVD-R100E/XEE, DVD-R100E/XET manual Using Markers, Playing Back a Marker, Clearing a Marker

Using Markers

(VR mode)

1 Press the MARKER button.

Marker N:0

OK RETURN

Playing Back a Marker

1 Press the MARKER button.

2 Press the œ √ buttons to select a bookmarked scene.

Marker 01 02 N:2

MOVE PLAY CANCEL RETURN

Playback

2 Press the OK button when the desired scene appears.

The number 1 is displayed and the scene is memorized.

Marker 01 N:1

MOVE PLAY CANCEL RETURN

3 Press the œ √ button to move to the next position.

4 Press the OK button when the desired scene appears.

The number 2 is displayed and the scene is memorized.

Marker 01 02 N:2

MOVE PLAY CANCEL RETURN

●DVD-RAM or DVD-RW (VR Mode) discs have the Marker function instead of the Bookmark function. The Marker function allows you to mark up to 99 scenes. Since the scenes may be displayed as many different pages, numbering is necessary. If a disc in use is encoded with Cartridge Protection or Disc Protection, Markers cannot be set or deleted.

Only playback is available.

3 Press the OK or button to start playing from the selected scene.

●If you press the NEXT SKIP ( )button or the PREVIOUS SKIP( )button in marker mode, when the next or current marked point plays for shorter than three seconds, playback starts from the previous marked point.

Clearing a Marker

1 Press the MARKER button.

2 Press the œ √ buttons to select a bookmarked scene.

Press the CANCEL button to delete the selected bookmark.

Marker 01 02 03 04 05 06 07 08 09 10 N:10

Marker 01 02 03 04 05 06 07 08 09 N:9

MOVE PLAY CANCEL RETURN

■When a marker is cleared while DVD-RAM/-RW (VR mode) is playing, marker numbers will change.

For example, if the 7th marker is cleared after ten markers are registered, the marker numbers after the eighth will automatically move ahead by one.

56- English