Samsung DVD-R100E/XET Setting Up Nicam Options, Using the †… and OK buttons, select On or Off

Setting Up NICAM Options

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound by setting NICAM on or off.

4 Using the †… buttons, move the selection bar to “NICAM” then press √ or OK button to select.

DVD-RAM(VR)			System
	Clock Set		√
	Install		√
	CM Skip Time	: 15 Sec	√
	NICAM	: On	√
MOVE	OK	RETURN	EXIT

1	With the unit in Stop mode, press the
	MENU button on the remote.

2 Select “Setup” using †… buttons, then press the √ or OK button.

DVD-RAM(VR)			Setup
	System		√
	Language		√
	Audio		√
	Video		√
	Parental Control		√
MOVE	OK	RETURN	EXIT

3 Using the †… buttons, move the selection bar to “System” then press √ or OK button to select.

DVD-RAM(VR)			Setup
	System		√
	Language		√
	Audio		√
	Video		√
	Parental Control		√
MOVE	OK	RETURN	EXIT

5 Using the †… and OK buttons, select “On” or “Off”.

•Off: Only set at this position to record the standard mono sound during a NICAM broadcast if the stereo sound is distorted due to inferior reception conditions.

•On: NICAM mode

System Setup

English -29