Samsung DVD-R100E/XEE, DVD-R100E/XET manual Video, Sound, No sound, No audio output

Video Timer Recording

The disc revolves, but no image or bad quality images are displayed.

Timer lamp flickers.

Checkpoint 1

Checkpoint 2

Checkpoint 3

Check whether there is damage to or any foreign material on your disc.

Some low quality discs may not play properly.

If scenes change from dark to bright suddenly, the screen may shake vertically temporarily, but this is not a fault.

Checkpoint 1 Check there is enough space in the disc for recording.

Checkpoint 2 Check whether the current disc is

recordable or not.

Make sure to check before the start time of recording.

Timer recording does not work properly.

Sound

No sound.

Checkpoint 1

Checkpoint 1

Checkpoint 2

Are you watching a program in slow or skip mode?

If you are playing a program at a speed other than normal speed, sound will not be heard.

Re-check the recording time and the end time settings again.

Recording will be cancelled, if the power is disconnected due to a power failure or another similar reason while recording.

Checkpoint 2	Check the connections and settings.
Checkpoint 3	Check whether the disc is damaged.
	Clean the disc, if necessary.
Checkpoint 4	Check whether the disc is inserted
	correctly with the label facing up.

No audio output.

Checkpoint 1

Additional Information

Check whether you have selected the correct digital output options in the Audio Output Options menu.

(See page 31.)

84- English