Samsung DVD-R100E/XEE, DVD-R100E/XET manual Plug & Auto Set up, Auto Channel Scan is completed

Plug & Auto Set up

Your DVD Recorder will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes. Your DVD Recorder will then be ready for use.

6 Auto Channel Scan is completed.

In 3~4 seconds, you will see Clock Setting Menu. If you want to start Clock Setting immediately, Press OK button.

Auto channel scan completed successfully.

OK

System Setup

1 Connect the RF cable as indicated on page 15~16.

(Connecting Your DVD Recorder to the TV Using the RF Cable)

2 Plug the DVD Recorder in.

3 Press a Number button to select the language.

Start the auto setup.

7 Check the date and time.

No Disc					Clock Set
Time		Date			Year
					2004 THU
12 :	00		01	JAN

MOVE OK RETURN EXIT

Input correct Time, Date, Year using †…œ √ buttons or number buttons.

Press OK button then the date and time will be saved. When you need to change clock setting, you can set up it manually. (see page 25)

■ Now, DVD Recorder is ready for use. Function

4

Auto setup will be started.

Check antenna and TV cable connection.

OK Cancel

NOTE

for “Plug & Auto Set Up” is fixed already. So if you want to change this fixed one, you can change it by Presetting the Stations in OSD “Manual Setup” menu. (see page 27)

5 Auto Channel scan will be started.

Channel scan

Now, Scanning.

5%

•The number of stations automatically stored by the DVD Recorder depends on the number of stations that it has found.

24- English