Panasonic SC-BTX70 Frequently asked questions, On the unit’s display continued, Setup, SD card

Models: SC-BTX70 SA-BTX70

1 56
Download 56 pages 42.5 Kb
Page 49
Image 49
On the unit’s display (continued)

On the unit’s display (continued)

Page

[W1]” is flashing.

≥There is no link between this unit and the wireless system. Check that the wireless system

42

(when using the optional wireless

is plugged into the household AC outlet and is turned on.

42

accessory: SH-FX70)

≥Ensure that the digital transmitter is fully inserted into the slot of this unit.

 

≥If the wireless system is not used, disconnect the digital transmitter from this unit.

U59

≥The unit is hot.

 

The unit switches to standby for safety reasons. Wait for about 30 minutes until the message disappears.

 

 

Select a position with good ventilation when installing the unit. Do not block the cooling fan

 

 

on the rear of the unit.

 

U72

≥The HDMI connection acts unusually.

U73

– The connected equipment is not HDMI compatible.

 

 

– Please use HDMI cables that have the HDMI logo (as shown on the cover).

 

 

– The HDMI cable is damaged.

 

 

 

 

Hor F

≥Check and correct the speaker connections.

8

(“ ” stands for a number.)

≥There is something unusual. (The service number displayed after H and F depends on the unit’s condition.)

 

≥Check the unit using the troubleshooting guide. If the service number does not disappear, do the following:

44 to 47

 

1 Disconnect the plug from the household AC outlet wait a few seconds, then reconnect it.

 

 

2 Press [POWER Í/I] to turn the power on. (The unit may be fixed.)

 

 

If the service number does not disappear despite doing the above, request service from

 

 

the dealer. Inform the dealer of the service number when requesting service.

 

 

 

 

DOCK UNLOCKED

≥The iPod docking switch lever is not locked in position.

27

 

– Make sure that the iPod docking switch lever is properly pushed back into place.

IPOD OVER CURRENT ERROR

≥The iPod is drawing too much power. Remove the iPod, and turn the unit off and on again.

 

 

 

START

≥The system is being restarted during the firmware update. Please do not turn off power.

29

 

 

 

UPD/

≥The firmware is being updated.

29

 

 

 

FINISH

≥The firmware update is complete.

29

 

 

 

NOT CONDITIONAL

≥The requested operation cannot be conducted.

 

 

 

NOT CONNECTED

≥The iPod is not connected or it is not correctly connected. Reconnect the iPod.

27

 

≥The iPod cannot be operated. Check that there is nothing wrong with the iPod.

ILLEGAL OPEN

≥The sliding door is not in the correct position. Turn the main unit off and on again.

 

 

 

llllllll

≥The main unit could not save the modified settings. Some settings may need to be reset.

 

 

 

Frequently asked questions

 

Setup

 

Page

Can I extend the speaker cables?

≥It is not recommended that you extend the speaker cables. Extending the speaker

 

 

cables may damage the speakers, and sound quality will be negatively affected.

 

 

Can I make the system into a 5.1ch/

≥You cannot make into a 5.1ch/7.1ch sound system.

42

 

7.1ch sound system?

This system can only be 2.1ch or a 4.1ch/6.1ch with 1 or 2 units of the optional

 

 

 

Panasonic wireless system, SH-FX70.

 

 

Disc

 

 

 

Can I play BD-Video and DVD-Video

≥You can play them if the video standard is NTSC; however you cannot play:

Cover

 

bought in another country?

BD-Video discs that do not include region “A”.

 

 

 

DVD-Video discs that do not include region “1” or “ALL”.

 

 

 

Refer to the disc’s jacket for more information.

 

 

Can BD-Video/DVD-Video that does

≥The region management information for BD-Video/DVD-Video indicates that the disc

 

not have a region code/number be

conforms to industry standards. You cannot play discs that do not conform to industry

 

 

played?

standards or do not have a region code or number.

 

 

 

 

 

 

Please tell me about disc

≥Refer to “Disc and card information” and “About MP3/JPEG files”.

39, 41

 

compatibility with this unit.

≥You cannot write to a disc with this unit.

 

SD card

 

 

 

What kinds of operations are

≥The following operations are available.

 

available on the SD card slot on this

– Play back JPEG data recorded with a digital camera etc.

 

unit?

– Play back AVCHD motion pictures recorded with Panasonic High Definition Video Camera

 

 

– Play back MPEG-2 motion pictures recorded with Panasonic Standard Definition Video Camera

 

 

≥If a BD-Video disc supporting BD-Live or BONUSVIEW is used, it is possible to copy secondary video,

19

 

 

etc. from the Internet or disc to the card and play it back together with the images on the disc, etc.

 

 

What kinds of cards can be used?

≥SD Memory Cards (from 8 MB to 2 GB), SDHC Memory Cards (from 4 GB to 32 GB),

40

 

 

miniSD Cards*, and microSD Cards* can be used.

 

 

 

* A miniSD Card and a microSD Card must be used in the adaptor included with the memory card.

 

 

 

Please confirm the latest information on the following website.

 

Reference

 

http://panasonic.co.jp/pavc/global/cs

 

 

(This site is in English only.)

 

 

 

 

RQT9479

49

Page 49
Image 49
Panasonic SC-BTX70, SA-BTX70 Frequently asked questions, On the unit’s display continued, Setup, SD card, Page, Disc