Listening to the Radio
Setting up the radio
| 1 | 2ABC | 3DEF |
| @. |
|
|
Numbered | 4GHI | 5JKL | 6MNO |
buttons | 7QRSP | 8TUV | 9XYZW |
|
| 0_, |
|
| RADIO | RADIO |
| ||
| SEARCH | |
SEARCH | SEARCH | |
|
| SEARCH |
,
OK
OK
STATUS AUDIO
STATUS AUDIO
Listening/confirming the preset channels
1Press [RADIO] to select “FM”.
2Press the numbered buttons to select the channel.
To select a
To select a
Alternatively, press [X, W] or [2, 1].
When a stereo FM broadcast is being received, |
|
ST | |
“ST” lights in the display. |
|
≥The FM setting is also shown on the TV display.
∫If noise is excessive
When FM is selected
Press [AUDIO] to display “MONO”. | T | MONO |
Press the button again to cancel the mode.
≥The mode is also canceled when you change the frequency. ≥This setting can be preset for each broadcasting station. When
“MONO” appears, follow procedures 1 and 2 in “Presetting stations manually”. (> below)
Radio
|
|
|
| Manual tuning |
|
| ||
|
|
|
| 1 Press [RADIO] to select “FM”. |
|
| ||
|
|
|
| 2 Press [SEARCH6] or [SEARCH5] to select | ||||
Presetting stations automatically | ||||||||
| the frequency. |
|
| |||||
Up to 30 stations can be set. |
|
|
| |||||
| ≥Main unit: |
|
| |||||
1 Press [RADIO] to select “FM”. |
| Press [:/6, 5/9] to select the frequency. | ||||||
Main unit: Press |
| ≥When a radio broadcast is being |
|
|
| |||
|
| T | MONO | |||||
2 Press [STATUS] to select the position to start the |
| received, “T” lights in the display. |
|
| ||||
auto preset search. |
| ≥To start automatic tuning, press |
|
| ||||
Each time you press the button: |
| and hold [SEARCH6] or |
|
|
| |||
| [SEARCH5] (main unit: [:/6, 5/9]) until the | |||||||
LOWEST (factory preset): |
| |||||||
To begin auto preset with the lowest frequency. |
| frequency starts scrolling. |
|
| ||||
| Tuning stops when a station is found. |
|
| |||||
(FM: 87.9 or 87.5) |
|
|
| |||||
| ∫ Presetting stations manually |
|
| |||||
CURRENT: |
|
|
| |||||
| Up to 30 stations can be set. |
|
| |||||
To begin auto preset with the current frequency.* |
|
|
| |||||
| 1 While listening to the radio broadcast |
|
| |||||
* To change the frequency, refer to “Manual tuning”. (B right) |
|
|
| |||||
| Press [OK]. |
|
| |||||
3 Press and hold [OK]. |
|
|
| |||||
| 2 While “P” is flashing on the display |
|
| |||||
Release the button when “AUTO” is |
|
|
|
|
| |||
|
|
| Press the numbered buttons to select a channel. |
| ||||
displayed. |
| To select a |
|
| ||||
|
|
| ||||||
|
|
|
|
|
| |||
The tuner starts to preset all the stations it |
|
|
| e.g., 1: [1] > [OK]. |
|
| ||
can receive into the channels in ascending |
| To select a |
|
| ||||
order. |
| e.g., 12: [1] B [2] |
|
| ||||
|
|
| ||||||
≥“SET OK” is displayed when the stations are set, and the radio tunes | A station previously stored is overwritten when another station is | |||||||
stored in the same channel preset. |
|
| ||||||
to the last preset station. |
|
|
≥“ERROR” is displayed when automatic presetting is unsuccessful. Preset the stations manually. (B right)
FM frequency step
Main unit:
The factory setting is set to 0.2 MHz, it can be changed to receive broadcasts allocated in 0.1 MHz. You may need to change this setting if the tuner seems to skip over the correct frequency for stations in your area.
1Press [RADIO/EXT-IN] to select “FM”.
2 Press and hold [RADIO/EXT-IN].
After a few seconds the display changes to show the current lowest frequency. Continue to hold the button down. The lowest frequency changes and the step is changed.
To return to the original settings, repeat steps 1 and 2.
After changing the setting, previously preset frequencies will be cleared. Preset them again.
NOTE
RQT9479
23