Panasonic SA-BTX70 Basic operations, Press Í to turn on the unit Insert the media. B see above

Playback

Basic operations

Instructions for operations are generally described using the remote control in these operating instructions.

Preparation

Turn on the TV and select the appropriate video input on the TV.

Inserting or removing a disc.	Inserting or removing an SD card
1 Press [DISC < OPEN/CLOSE] to open the sliding door.	1 Push $ to open the SD card door.
2 Place the disc onto the spindle in the center and	2 Insert the SD card into the SD card slot.
then push the disc down until it clicks into place.
≥When inserting or removing a disc, tilt the disc so
as not to touch the sliding door.	Insert the card with the cut-off
	corner on the left.
	≥Press on the center of the
	card until it clicks into place.
Label facing up
≥Press [DISC < OPEN/CLOSE] again to close the sliding door.	≥To remove the card, press on the center of the card
≥To remove the disc, while pressing down on the spindle,	and pull it straight out.
grasp the edge of the disc and gently lift it out.

≥DVD-RAM: Remove the discs from their cartridges before use. ≥Insert double-sided discs so the label for the side you

want to play is facing up.

Stop	Pause
BD/SD, iPod	Play

RADIO/EXT-IN

Skip/Search/Slow-motion ,VOLUME

Headphones (not included)

Headphone plug type: ‰3.5 mm (1/8z) stereo mini plug ≥Reduce the volume before connecting.

≥Audio is automatically switched to 2-channel stereo.

≥To prevent hearing damage, avoid listening for prolonged periods of time.

Excessive sound pressure from earphones and headphones can cause hearing loss.

1Press [Í] to turn on the unit.

2 Insert the media. (B see above)

Play starts.

≥If play does not start, press [1PLAY].

≥When [1PLAY] is pressed with the sliding door open to either side, the sliding door will close. If a disc is inserted, playback will start.

≥If a media with data in different file formats is inserted, the file selection menu is displayed. Press [3, 4] to select the desired file format and press [OK].

≥If a menu is displayed, press [3, 4, 2, 1] to select the item and press [OK].

≥If the screen prompting you to use the color buttons appears, continue to operate with the color buttons on the remote control.

NOTE

TIPS

≥Disc playback will stop and the sliding door will open if [iPod < OPEN/CLOSE] is pressed twice during disc playback.

– The resume play function may operate with some discs.

≥Be sure to press [DISC < OPEN/CLOSE] to open and close the sliding door. Forcing the sliding door open or close, will damage the unit.

≥Keep your fingers away from the sliding door when it is moving to avoid minor injuries.

≥DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Press [∫STOP] when you finish to preserve the unit’s motor and your television screen.

≥If a media is inserted while the unit is stopped, the drive switches automatically depending on the inserted media.

≥The producers of the disc can control how discs are played. So you may not always be able to control play as described in these operating instructions. Read the disc’s instructions carefully.

≥When playing a set of two or more BD-Video discs, the menu screen may continue to display even if the disc has been removed.

To display menus

[BD-V] [AVCHD] [DVD-VR] [DVD-V]

Press [TOP MENU/DIRECT NAVIGATOR].

To show Pop-up menu [BD-V]

The Pop-up menu is a special feature available with some BD-Video discs. This menu may vary with discs. For the operating method, refer to the instructions for the disc.

1)Press [POP-UP MENU].

2)Press [3, 4, 2, 1] to select the item and press [OK].

≥Pop-up menu also appears by pressing [SUB MENU] and selecting “Pop-up Menu”. ≥Press [POP-UP MENU] to exit the screen.

≥It may take time to read BD-Video discs that include BD-J (> 51).

RQT9479

16