Getting started
Connections to a Set Top Box, etc.
Use the following connections when you want to output the original surround audio from your Set Top Box, cable TV, VCR, DVD recorder, etc. through this unit’s speakers.
≥Do not connect through the video cassette recorder.
Due to copy guard protection, the picture may not be displayed properly. ≥Turn off all equipment before connection.
STB, VCR,
DVD recorder, etc.
OPTICAL
≥This unit can decode the surround signal from the Set Top Box (Satellite receiver, Cable box, etc.).
Press
* “(CABLE/SAT)” is displayed next to DIGITAL IN 2 when |
TV
OUT
set for CABLE/SAT AUDIO input. (> 25, Setting the TV |
audio for VIERA Link “HDAVI Control”) |
≥For connections between this unit and the TV, refer to “TV connections”. (> 9)
Refer to the operating instructions of the respective devices for the optimal connections.
OPTICAL 2(STB)
Optical digital audio cable (not included)
Main unit
≥If you have various sound sources and this unit’s terminals are not sufficient, connect them to the available inputs on the TV and the TV output should then be connected to the “AUX” or “OPTICAL 1(TV)” terminal of the main unit.
Refer to the operating instructions of the TV, video cassette recorder, DVD recorder or Set Top Box for settings to output its audio via AUDIO OUT or OPTICAL OUT terminal of the TV.
–In some cases the audio signal will only be output as 2ch audio from the TV. In this case, connect the Set Top Box (Satellite receiver, Cable box, etc.) that will be used most commonly with
Radio antenna connections
≥Keep loose antenna cables away from other wires and cables.
Main unit
1FM Indoor antenna
FM 75Ω ANT
Using an FM indoor antenna Using an FM outdoor antenna
Use outdoor antenna if FM radio reception is poor.
≥Disconnect the antenna when the unit is not in use.
≥Do not use the outdoor antenna during an electrical storm.
FM indoor antenna (included) Affix this end of the antenna where reception is best.
Adhesive tape
1
FM outdoor antenna
[Using a TV antenna (not included)] The antenna should be installed by a competent technician.
75 Ω coaxial cable*
(not included)
Antenna plug (not included)
10 mm (13/32) 7 mm (9/32)
10 mm (13/32)Peel back
Install the coaxial cable.
Clamp the cable conductor, and wind it on so that it does not contact anything else.
75 Ω | FM | 75 Ω | FM |
ANT | ANT |
RQT9479 | Main unit | Main unit | Clamp with pliers | Attach the cover. |
|
|
10