Samsung DVD-R125 Setting up Video Output

English -

33

5

Press the …† buttons to select the desired

item, then press the OK or √button.

NOTE

Audio Options

Digital Output

1. PCM : Select this when you have no equipment that

can decode Dolby Digital (or MPEG-2) signal.

When you play Dolby Digital (or MPEG-2)

sound track, the digital output are converted to

PCM Stereo.

2. Bitstream : Output Dolby Digital (or MPEG-2) audio as

bitstream. Select this when your AV

receiver or AV amplifier have Dolby Digital

(or MPEG-2) Decoder.

■ Digital output setting is equally applied to

both Dolby Digital and MPEG-2 audio.

LPCM sound track is always outputted as

PCM. It has no relation with Digital Output

setting.

■ Be sure to select the correct Digital

Output or you will hear no sound or loud

noise.

NOTE

DTS

1. Off : Doesn’t output DTS signal.

Select this when your AV receiver or AV

amplifier does not have DTS decoder.

2. On : Outputs DTS Bitstream via digital output when you

play DTS track.

Select this only when your AV receiver (or AV

amplifier) have DTS decoder.

Dynamic Compression

This is only active when a Dolby Digital signal is

detected.

1. Off : You can enjoy the movie with the standard

Dynamic Range.

2. On :When Movie soundtracks are played at low

volume or from smaller speakers, the system

can apply appropriate compression to make

low-level content more intelligible and prevent

dramatic passages from getting too loud.

■ When DTS soundtrack is played, sound

does not output from AV Audio Output.

NOTE

■ Press the RETURN or œbutton to return

to the previous menu.

Press the MENU button to exit the menu.

System Setup

You can enjoy high quality image through RGB or

Component video connections.

1

With the unit in Stop mode/No Disc mode,

press the MENU button.

2

Press the …† buttons to select Setup, then

press the OK or √button.

3

Press the …† buttons to select Video, then

press the OK or √button.

Video setup menu will be displayed.

Setting up Video Output

Options

RETURNOKMOVE EXIT

Setup

No Disc

System

√√

Clock Set

√√

Language

√√

Audio

√√

Video

√√

Parental Control

√√

Install

√√

Programme

Setup

RETURNOKMOVE EXIT

Timer Record

No Disc

Video Plus+

√√

Timer Record

√√

Video Plus+ Extended : Off

√√

Programme

Setup

RETURNOKMOVE EXIT

Video

No Disc

TV Aspect : 16:9 Wide

√√

3D Noise Reduction : Off

√√

HDMI/DVI Resolution : 576p

√√

Video Output

:

Component

√√

Programme

Setup

00842A-R125-XEU_17~40 6/7/05 8:07 PM Page 33

Contents

Main I Warning CAUTION Precaution Important Safety Instructions Handling Cautions Maintenance of Cabinet Disc Handling Disc Storage Using MPEG4 disc Disc Specifications DVD-Video Audio CD DVD-RAM Disc Playback and Recording Protection Do not use the following discs! COPY PROTECTION Getting Started Contents Editing Recording Playback Editing Additional Information Recording Playback General Features How to use the DVD Recorder Step 1 Select the disc type Before reading the user s manual Step 2 Step 3 Recording Step 5 Step 6 Step 4 Unpacking Accessories Preparing the Remote Control Install Batteries in the Remote Control If the remote does not operate properly: To determine whether your television is compatible, follow the instructions below. Controllable TV Codes Then you can control the television using the following buttons after the TV button. Description Front Panel Front Panel Display Rear Panel Tour of the Remote Control Connecting & Setting Up Quick Overview Connecting the DVD- Recorder Additional connections S-Video, Component video and Progressive Output Modes Other type of connecting the Video output cable Case 1 : Connecting to a Video (Composite) output jack Case 2 : Connecting to an S-Video output jack Case 3 : Component Video output jacks Case 3: Connecting to an AV amplifier with a digital output jack Case 1 : Connecting to your TV Other type of connecting the Audio output cable Case 2 : Connecting to a stereo amplifier with AV output jacks Case 1 : Connecting to a TV with HDMI Jack Case 2 : Connecting to a TV with DVI Jack Connecting HDMI/DVI to a TV Case 2 : Connecting a Camcorder to the DV IN jack Case 1 : Connecting a VCR, Set-Top Box(STB), DVD recorder or Camcorder to the AV3 IN jacks Connecting to AV3 IN, DV input jack MENU Button , Buttons OK Button RETURN Button System Setup On-Screen Menu Navigation Plug & Auto Set up Press the buttons to select On for the Auto Clock. 00842A-R125-XEU_17~40 6/7/05 8:07 PM Page 25 Press the OK button, then the date and time will be saved. If you dont press the OK button, it will not be saved. Setting the Clock You must have the RF cable connected to set the Auto Clock. See page 17. The DVD Recorder automatically sets the Press the buttons to select Auto Setup, then press the OK or button. Presetting Channels with the Auto Setup function Press the buttons to select Manual Setup, then press the OK or button. Press the buttons to select Install, then Presetting Channels with the Manual Setup function Manual Setup language option, then press the OK or Greek Language setup menu will be displayed. Setting up the Language to the previous menu. Press the MENU button to exit the menu. The selected language will only appear if it is supported on the disc. If the subtitle language is displayed in EP Mode Time Setting CAUTION DVD-R discs cannot be unfinalised. Press the buttons to select Yes and Press the STOP button to stop recording. Automatic Chapter Creation CHAPTER Previous Top Next The Automatic Chapter Creation function does not work during Timer Recording or when you turn the power off. Setting up the Front Display Options Setting up NICAM Options Press the buttons to select Audio, then Audio setup menu will be displayed. audio option, then press the OK or Setting up the Audio Press the buttons to select NICAM, DivX(R) Registration Audio Options Press the buttons to select Video, then Setting up Video Output P.SCAN button on the front of the DVD Recorder. The message Video Output Mode Progressive Scan will appear. Setting up the Progressive scan Press the buttons to select Video Output, then press the OK or button. Available Video Output Jack P.SCAN button on the front of the DVD Recorder. item, then press the OK or button. Canceling the Progressive scan Do not press the P.SCAN button if you If you press the P.SCAN button by This function allows you to setup the TV screen settings. Press the buttons to select Video, then Display(Video) Options Output selection Press the OK or button to select Password. Press the buttons to select Parental Control, then press the OK or button. Enter the 4-digit password using the 0to 9 buttons on the remote control. Setting up the Parental Control to the previous menu. Press the MENU button to exit the menu. If you forgot your password Remove the disc. Press and hold (FF) on the front panel for 5 seconds or more. About the Rating Level About the Change Password See page 37 if you forgot your password. Recording Recordable discs Before Recording Unrecordable video Concerning Copy Control Signals Recording Formats DVD-RW(Video mode)/-R DVD-RW(VR mode)/-RAM Recording the current TV programme you are watching Press the OPEN/CLOSE button and place a recordable disc on the disc tray. Press the OPEN/CLOSE button to close the disc tray. About INFO Key Checking the available disc space (Disc Information) To stop recording Press the PROG ( / ) or number (~)buttons to select the current programme you want to record. SP LP EP XP Press the REC button. Recording from external equipment you are watching Copying from a Camcorder Making a One Touch Recording (OTR) TIMER button. Set timer recording option. Making a Timer Recording Before you start Editing the Scheduled Record List TIMER button. Press the RETURN button to close the Timer Recording screen. Press the buttons to select the number of the timer recording you want to edit, then Flexible Recording (for Timer recording only) Deleting the Scheduled Record List If the programme and times are correct, Turn the power off by pressing the STANDBY/ON button to activate the timer recording setting. Refer to pages 46~48 if you want to: TIMER button. Press the buttons to select Video Plus+, then press the OK or button. Using the Video Plus+ Feature 00842A-R125-XEU_41~50 6/7/05 7:53 PM Page 50 Press the buttons to select Programme, then press the OK or button. Press the buttons to select Video Plus+ Extended, then press the OK or button Press the buttons to select Video Plus+ Extended time, then press the OK or Video Plus+ Extended Recording the Standard Timer List When the scheduled recording is operating, the programme being recorded will not display on TV. Press the TV/DVD button if you want to see the programmed being recorded on TV. Playback Region code (DVD-Video only) Disc types that can be played Discs that cannot be played Before Playing Playing a Disc Press the OPEN/CLOSE button to close the disc tray. Press the OPEN/CLOSE button. Press the STOP button to stop playback. Using the Search Functions During play, press the SEARCH ( ) button on the remote control. Using the Disc Menu & Title Menu For DVD-VIDEO discs Press the DISC MENU button to enter the disc menu of the disc. About ANYKEY Slow Motion Play Step Motion Play Skipping Chapters or Tracks Moving to a scene directly using the ANYKEY Using the Repeat Function Using the REPEAT button ANYKEY again Title Using the REPEA Using the Playing Repeatedly(Repeat Playback) Using the Press the REPEAT button during playback. Using the REPEAT button Using the REPEA T button Selecting the Subtitle Subtitle languages may not work depending on the disc type. This is only available during playback. Using the SUBTITLE button Press the SUBTITLE button during Press the SUBTITLE or buttons to select the desired subtitle language. Changing the Camera Angle Using the Using the AUDIO button Using the This function is disc-dependent, may not Zooming-In Using Bookmarks Using Markers Clearing a bookmark Playing back a bookmark Press the MARKER button during Clearing a Marker Playing an Audio CD/MP3 Playing an Audio CD(CD-DA) Audio CD(CD-DA) Screen Elements Playing an MP3 Disc Buttons on the Remote Control used for Audio CD(CD-DA) playback Buttons on the Remote Control used for MP3 playback MP3 Screen Elements You can register a maximum of 30 tracks in the playlist. Press the select the order in which you want tracks to play. Repeat Mode will be highlighted. To Programme TracksPlay Option Mode Playing a Picture Playing an MPEG4 Insert an MPEG4 Disc into the disc tray. Press the Playing the Title List Title List Screen Elements To stop title play, press the STOP button. Editing Renaming(Labeling) a Title 00842A-R125-XEU_70~86 6/7/05 7:55 PM Page 70 The Rename screen is displayed. you want to rename from the Title List, Basic Editing (Title List) desired characters, then press the OK Back Space: Deletes and moves the cursor backwards by one position. (Equivalent to the CANCEL button) Space: Enters a blank and moves the cursor one Locking(Protecting) a Title 00842A-R125-XEU_70~86 6/7/05 7:55 PM Page 71 Follow these instructions to lock an entry to protect it from accidental deletion. you want to protect in the Title List, then Press the buttons to select Protection, Deleting a Section of a Title you want to edit from the Title List, then Press the buttons to select Edit, then Press the OK button at the starting point. Edit Title List Screen Elements Press the OK button at the end point. Press the OK button to select the Delete. Press buttons to select Yes, then press the OK button. Advanced Editing (Playlist) Press the buttons to select Play, then select the OK button. The playlist entries will be played. To view the current status of the disc and progress of playback : Press the INFO button, and the information about the disc will appear. Playing Entries in the Playlist Follow these instructions to play the playlist entries. With the unit in Stop mode, press the The Edit Playlist menu is displayed : Play, Rename, Edit Screen, Copy, Delete. Enter the desired characters using the buttons. Renaming a Playlist Entry Follow these instructions to rename a playlist entry, i.e. to edit the title of a playlist entry. With the unit in Stop mode, press the The Edit Playlist menu is displayed :Play, Rename, Press the buttons to select Rename, then Editing a Scene for the Playlist Follow these instructions to edit scenes for a playlist. To stop scene play, press the STOP button. The Edit Scene screen is displayed. With the unit in Stop mode, press the Modifying a Scene (Replacing a Scene) scene you want to move (change the position), then press the OK button. Press the buttons to select Move, then position. A yellow selection window is displayed on the Moving a Scene (Changing the Position of a Scene) screen may have a slight difference. scene that will have a new scene inserted before it, then press the OK button. A yellow selection window is displayed on the scene to be added as the new scene. Press the buttons to select Add, then Copying a Playlist Entry to the Playlist YLIST button Using the PLAY Using the PLA LIST button Deleting a Playlist Entry from the Playlist Using the PLAYLIST button Using the PLA YLIST button With the unit in Stop mode, press the Disc Manager You may need to clear disc protect before beginning editing. Depending on the kind of disc, the Disc Protection Protection, then press the OK or button. Press the button to select Protected, then Formatting a Disc Use these instructions to format a disc. The Disc Protection should also be cleared. Delete All Title Lists DVD-VR DVD-V DVD-RAM DVD-RW DVD-RW DVD-R Finalising a disc Press the button to select Disc Finalise, then press the OK or button. You will be prompted with the message 'Do you want to finalise disc?'. The disc is finalised. DVD-R(V) Unfinalising a disc (V/VR mode) 00842A-R125-XEU_70~86 6/7/05 7:56 PM Page 86 Press the button to select Disc Unfinalise, then press the OK or button. You will be prompted with the message 'Do you want to unfinalise disc?'. The disc is unfinalised. Additional Information Troubleshooting Video Playback Sound Timer Recording HDMI Remote Control Other Specifications Audio Output UNITED KINGDOM REPUBLIC OF IRELAND AK68-00842A-01