Case 2 : Connecting to an S-Video output jack

1.Connect an S-Video cable (not included) between the S-VIDEO OUT jack on DVD Recorder and S-VIDEO INPUT jack on your TV (or AV amplifier).

2.Connect audio cables (white and red) between the AV AUDIO OUT jacks on DVD Recorder and AUDIO IN jacks on TV (or AV amplifier).

You will enjoy high quality images.

Case 3 : Component Video output jacks

1.Connect Component video cables(not supplied) between the COMPONENT OUT(Y,PB,PR) jacks on

DVD Recorder and COMPONENT IN(Y,PB,PR) jacks on your TV.

2.Connect audio cables (white and red) between the AUDIO OUT jacks on the DVD Recorder and AUDIO IN jacks on TV (or AV amplifier).

(See pages 20).

Press the input selection on your TV remote control until the Component signal from the DVD Recorder appears on your TV screen.

3.After connecting, refer to the page 33 to 35.

You will enjoy high quality and accurate colour reproduction images.

2

COMPONENT

green

red

blue

green

 

 

 

 

Y

 

1

 

 

 

blue

 

 

 

 

 

 

Pb

 

 

 

 

 

red

 

 

 

Pr

 

 

 

 

Connecting & Setting Up

The Component jacks will not output video resolutions above 576p.

To view 720p and 1080i connect the DVD Recorder to your TV with the supplied HDMI cable.

With HDMI connected, press the P.SCAN button to alternate between all available resolutions.

(See page 34)

Make sure that the colour coded

NOTEconnections match. The Y, PB, PR component output jacks of your DVD Recorder must be connected to the exact corresponding component input jacks on your TV.

Progressive setting is only available when the Video Out is set to Component.

(See pages 34~35)

English -19

Page 19
Image 19
Samsung DVD-R125 Case 2 Connecting to an S-Video output jack, Case 3 Component Video output jacks, See pages 34~35