Connecting the DVD

Additional connections

Recorder

 

Connecting & Setting Up

You can connect your DVD Recorder to the television using the SCART cable if the appropriate input is available on the television.

1.Connect the RF cable as shown.

2.Connect one end of the SCART cable to the AV1 socket on the rear of the DVD Recorder.

3.Plug the other end into the appropriate connector on the television.

4.Plug in the DVD Recorder and TV

5.Turn on the DVD Recorder and TV.

6.Press the INPUT SEL. button on your TV remote control until the Video signal from the DVD Recorder appears on the TV screen.

To RF IN

To RF OUT

RF Cable

To ANT INPUT

The RF cable connection of this DVD

You can connect your DVD Recorder to a satellite or

digital tuner.

external device (VCR/Satellite receiver)

- DVD mode

1.Connect the AV2 connector of DVD Recorder and VCR/Satellite receiver or digital tuner using a SCART cable.

2.Connect the AV1 connector to the SCART AV connector on TV.

3.Turn on the DVD Recorder, VCR/Satellite receiver or digital tuner and TV.

4.Set Input mode on AV2.

- TV mode

1. Press the TV/DVD button on remote control,then

NOTE

Recorder sends only signals of TV. You must connect SCART cable or Audio/Video cables to watch a signal from your DVD Recorder.

“TV” appear on Front LED display. (or turn off DVD

Recorder.)

2. You can watch programmes from a satellite or digital

tuner connected to this DVD Recorder, even when

TV mode

Press the TV/DVD button on remote control, then “TV” appear on Front LED display (or turn off DVD Recorder).

the DVD Recorder is turned off.

18- English

Page 18
Image 18
Samsung DVD-R129/XEB, DVD-R128/XEG, DVD-R129/XEG, DVD-R128/XEB, DVD-R129/EUR Connecting the DVD, DVD mode, TV mode, Recorder