Connecting & Setting Up

Case 3 : Component Video output jacks

1.Connect Component video cables(not supplied) between the COMPONENT OUT(Y,PB,PR) jacks on

DVD Recorder and COMPONENT IN(Y,PB,PR) jacks on your TV.

2.Connect audio cables (white and red) between the AUDIO OUT jacks on the DVD Recorder and AUDIO IN jacks on TV (or AV amplifier).

(See pages 20-21).

3.After connecting, refer to the page 34 to 35.

You will enjoy high quality and accurate colour reproduction images.

Other type of connecting the Audio output cable

There are several ways to output audio signal not using scart cables. Select the audio connection that best suits you below.

Case 1 : Connecting to your TV

Case 2 : Connecting to a stereo amplifier with AV output jacks

Case 3 : Connecting to an AV amplifier with a digital output jack

Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of DTS, Inc.

red

blue

green

Case 1 : Connecting to your TV

green

 

 

 

blue

 

 

If your TV has audio input jacks, use this connection.

 

 

 

red

 

 

 

The Component jacks will not output

NOTEvideo resolutions above 576p.

To view 720p and 1080i connect the DVD Recorder to your TV with the supplied HDMI cable.

With HDMI connected, press the P.SCAN button to alternate between all available resolutions.

(See page 37)

Make sure that the colour coded connections match. The Y, PB, PR component output jacks of your DVD Recorder must be connected to the exact corresponding component input jacks on your TV.

Progressive setting is only available when the Video Out is set to Component.

(See page 34)

yellow

white

red

red

white

yellow

20- English

Page 20
Image 20
Samsung DVD-R145/EUR manual Other type of connecting the Audio output cable, Case 3 Component Video output jacks