Samsung DVD-R145/EUR Recording from external equipment you are watching, Copying from a Camcorder

Recording

Recording from external equipment you are watching

Before you start

Check that the disc has enough available space for the recording. Adjust the recording mode.

1 Press the OPEN/CLOSE button, place a recordable disc on the disc tray.

2 Press the OPEN/CLOSE button to close the disc tray.

Wait until “LOAD” disappears from the front panel display.

If an unused DVD±RW/+R disc is used, whether to initialize or not will be asked first. (See page 41)

3 Press the INPUT SEL. button to select the input source according to the connection you made.

The front panel display changes in the following sequence:

➞PR Number ➞ AV1 ➞ AV2 ➞ AV3 ➞ DV

5 Press the REC button.

To pause recording

Press the PLAY/PAUSE( ) button to pause a recording in progress.

●Press the PLAY/PAUSE( ) button again to resume recording.

●You can switch channels by pressing the PROG ( / ) buttons while recording pauses.

To stop recording

Press the STOP button to stop or finish a recording in progress.

●When using DVD-RAM/DVD±RW/DVD±R discs, the message “Updating the disc information. Please wait for a moment.” is displayed.

■ You can not change the recording mode while recording or Pause.

NOTE

■Recording will stop automatically if there is no free space left for recording.

■Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc, and up to 48 titles onto a DVD+RW/+R disc.

■Recording will stop automatically if a copy protected image is selected.

■DVD-RAM/DVD±RW/DVD+R discs must be formatted before starting to record.

Most new discs are sold unformatted.

■Do not use DVD-R authoring discs with this DVD Recorder.

If you connect a digital camcorder, press the INPUT SEL. button to select DV.

(See pages 44-45)

4 Press the REC MODE button repeatedly, (or press the REC MODE button, then press the …† button) to select the recording speed(quality).

➞SP ➞ LP ➞ EP ➞ XP

Copying from a

Camcorder

You may control the Camcorder using the IEEE1394 (DV) interface.

Record Mode SP (02:12)

Before you start

Check that the disc has enough available space for the recording. Adjust the recording mode.

1 Press the OPEN/CLOSE button, place a recordable disc on the disc tray.

44- English