Sony DCR-TRV50E, DCR-TRV40E operating instructions 261, When recording a close subject

Changing the default settings with the menu

				POWER
Icon/item		Mode	Meaning	switch
OTHERS
	DISPLAY	zLCD	To show the display on the LCD screen and in the	VCR
			viewfinder	CAMERA
		V-OUT/LCD	To show the display on the TV screen, LCD screen	MEMORY/
				NETWORK
			and in the viewfinder
	REC LAMP	zON	To light up the camera recording lamp at the front of	CAMERA
			your camcorder	MEMORY/
		OFF	To turn the camera recording lamp off so that the	NETWORK
			person is not aware of the recording
	VIDEO EDIT	zRETURN	To cancel video editing.	VCR
		TAPE	To make a programme and perform video editing
			(p. 114)
		MEMORY	To make programme and perform MPEG editing
			(p. 190)

Note

If you press DISPLAY/TOUCH PANEL with DISPLAY set to V-OUT/LCD in the menu settings, the picture from a TV or VCR will not appear on the LCD screen even when your camcorder is connected to outputs on the TV or VCR.

When recording a close subject

When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may reflect on the subject if it is close. In this case, we recommend that you set REC LAMP to OFF.

In more than five minutes after removing the power supply

The WHT BAL, FLASH LVL, HiFi SOUND, AUDIO MIX and COMMANDER settings are returned to their default settings.

Other menu settings are held in memory even when the battery is removed.

Customising Your Camcorder Выполнение индивидуальных установок на Вашей видеокамере

261