Sony DCR-TRV50E, DCR-TRV40E operating instructions 255, Memory SET Still SET Burst

Changing the default settings with the menu

						POWER
Icon/item			Mode		Meaning	switch
MEMORY SET
	STILL SET
		BURST	zOFF		To not record continuously.	MEMORY/
			NORMAL		To record from three to nine images continuously	NETWORK
					(p. 163)
			HIGH SPEED		To record up to 16 images continuously fast
			EXP BRKTG		To record three images continuously with different
					exposure
			MULTI SCRN		To record nine images continuously, display the
					images on a single page divided into nine boxes
		QUALITY	zSUPER FINE		To record still images in the finest image quality	VCR
					mode (p. 155)	MEMORY/
						NETWORK
			FINE		To record still images in the fine image quality mode
			STANDARD		To record still images in the standard image quality
					mode
		IMAGESIZE	z1360 × 1020		To record still images at 1360 × 1020 size (p. 158)	MEMORY/
			640 ×	480	To record still images at 640 × 480 size	NETWORK
	MOVIE SET
		IMAGESIZE	z320 ×	240	To record moving pictures at 320 × 240 size	VCR
					(p. 158).	MEMORY/
			160 ×	112	To record moving pictures at 160 × 112 size.	NETWORK
		REMAIN zAUTO			To display the remaining capacity of the “Memory	VCR
					Stick” in the following cases:	MEMORY/
					• For five seconds after setting the POWER switch to	NETWORK
					MEMORY/NETWORK (DCR-TRV50E only) or
					VCR
					• For five seconds after setting the POWER switch to
					MEMORY/NETWORK (DCR-TRV50E only) or
					VCR and inserting a “Memory Stick”
					• When the remaining capacity of the “Memory
					Stick” is less than two minutes after setting the
					POWER switch to MEMORY/NETWORK (DCR-
					TRV50E only)
					• For five seconds from the start of moving picture
					recording
					• For five seconds after completing a moving picture
					recording
			ON		To always display the remaining capacity of the
					“Memory Stick”

(continued on the following page)

Customising Your Camcorder Выполнение индивидуальных установок на Вашей видеокамере

255