277

Types of trouble and how to correct trouble

Symptom	Cause and/or Corrective Actions
The title is not recorded.	• The cassette has no cassette memory.
	c Use a cassette with cassette memory (p. 140).
	• The cassette memory is full.
	c Erase unwanted titles (p. 143).
	• The cassette is set to prevent accidental erasure.
	c Slide the write-protect tab so that red portion is not visible
	(p. 33).
	• The tape has a blank portion between recorded portions.
	c Superimpose the title to recorded positions (p. 140).

The cassette label is not recorded. • The cassette has no cassette memory.

cUse a cassette with cassette memory (p. 146).

•The cassette memory is full.

cErase unwanted data (p. 143).

•The cassette is set to prevent accidental erasure.

cSlide the write-protect tab so that red mark is not visible (p. 34).

Digital program editing to a tape • The input selector on the VCR is not set correctly.

does not function.c Check the connection and set the input selector on the VCR again (p. 114)

•The camcorder is connected to DV equipment of other than Sony using the i.LINK cable (DV connecting cable).

c Set it to IR (p. 120).

•You have attempted to set a programme on a blank portion of the tape.

c Set the programme again on a recorded portion (p. 124).

•The camcorder and the VCR are not synchronised.

cAdjust the synchronisation (p. 122).

•The IR SETUP code is incorrect.

cSet the correct code (p. 117).

Digital program editing to a	• Setting programme on a blank portion of the tape is attempted.
“Memory Stick” does not function.	c Set the programme again on a recorded portion (p. 190).
The Remote Commander supplied	• COMMANDER is set to OFF in the menu settings.
with your camcorder does not work.	c Set it to ON (p. 260).
	• Something is blocking the infrared rays.
	c Remove the obstacle.
	• The batteries are inserted with + and – incorrectly matching +
	and – inside the battery compartment.
	c Insert the batteries correctly (p. 319).
	• The batteries are dead.
	c Insert new ones (p. 319).
The picture from a TV or VCR does	• DISPLAY is set to V-OUT/LCD in the menu settings.
not appear even when your	c Set it to LCD (p. 261).
camcorder is connected to output on
the TV or VCR.
	(continued on the following page)

Troubleshooting Поиск и устранение неисправностей