Sony DCR-TRV40E, DCR-TRV50E operating instructions 252

Changing the default settings with the menu

Изменение установок по умолчанию с помощью меню

Menu items are displayed as the following	Опции меню выводятся на экран в виде
icons:	следующих пиктограмм:
MANUAL SET	MANUAL SET (Установка вручную)
CAMERA SET	CAMERA SET (Установка
VCR SET	видеокамеры)
LCD/VF SET	VCR SET (Установка
MEMORY SET	видеомагнитофона)
PRINT SET	LCD/VF SET (Установка ЖК-дисплея/
CM SET	видоискателя)
TAPE SET	MEMORY SET (Установка памяти)
SETUP MENU	PRINT SET (Установка печати)
OTHERS	CM SET (Установка кассетной памяти)

TAPE SET (Установка ленты)

SETUP MENU (Меню установок)

OTHERS (Прочее)

English

Selecting the mode setting of each item z is the default setting.

Menu items differ depending on the position of the POWER switch. The screen shows only the items you can operate at the moment.

The POWER switch is the name of the switch on the DCR-TRV50E. It is referred to as MEMORY on the DCR-TRV40E.

				POWER
Icon/item		Mode	Meaning	switch
MANUAL SET
	P EFFECT	——	To add special effects like those in films or on the TV	VCR
			to images (p. 77, 96)	CAMERA
	FLASH LVL	HIGH	Makes the flash level higher than normal.	CAMERA
		zNORMAL	Normal setting	MEMORY/
				NETWORK
		LOW	Makes the flash level lower than normal.
	WHT BAL	——	To adjust the white balance (p. 71)	CAMERA
				MEMORY/
				NETWORK
	N.S. LIGHT	zON	To use the NightShot Light (p. 49)	CAMERA
		OFF	To cancel the NightShot Light	MEMORY/
				NETWORK
	AUTO SHTR	zON	To automatically activate the electronic shutter when	CAMERA
			shooting in bright conditions
		OFF	To not automatically activate the electronic shutter
			even when shooting in bright conditions

Note on FLASH LVL

You cannot adjust FLASH LVL if the external flash (optional) is not compatible with the flash level.

252