Samsung DVD-V6700 Before Connecting the DVD-VCR, Connecting a STB to the DVD-VCR, ENG-13

Chapter 2

C O N N E C T I O N S

Before Connecting the DVD-VCR

-Always turn off the DVD-VCR, TV, and other components before you connect or disconnect any cables.

-Refer to the user’s manual of the additional components (such as a TV) you are connecting for more information on those particular components.

Connecting a STB to the DVD-VCR

The following instructions show how to connect a Set-Top Box,TV and Amplifier to the DVD-VCR

1

Use a TV antenna cable to connect the signal source coming from the antenna or wall to the ANT IN jack on the STB.

2

Use the Video/Audio Cable to connect the LINE

OUT jacks on the STB to the AUDIO/VIDEO

LINE IN 1 jacks on the DVD-VCR.

3

Select LINE 1 by pressing LINE IN SELECT

/ button on the front panel in VCR mode .

4

Use the Video/Audio Cable to connect the LINE

AUDIO OUT(R/L)/VIDEO OUT jacks on the DVD-

VCR to the Audio & Video jacks on the TV.

Tunerless DVD Player & VCR

This DVD-VCR unit does not have a TV tuner. Recording TV broadcasts is possible via Connection to Cable/Satellite (Set-top) boxes and Multi Channel Video Services.

Notes

-If you want to use other connections to a TV, please refer to the Connection to a TV page. (See pages 14 to 17)

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 to 19)

-When you connect a STB through the LINE IN 1 jack of the DVD-VCR, you still can see the picture from the STB on your TV set if the DVD-VCR is turned off.

ENG-13