Samsung DVD-V6700 instruction manual Connecting to a TV Video, ENG-17

C O N N E C T I O N S

Connecting to a TV (Video)

1

Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT jacks on the rear of the DVD-VCR to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV.

2

Turn on the DVD-VCR and TV.

White Yellow Red

Audio Cable

Video Cable

3 Red White Yellow

Press the input selector on your TV remote control until the Video signal from the DVD-VCR appears on the TV screen.

Notes

-Noise may be generated if the audio cable is placed too close to the power cable.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 18 ~ 19).

-The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual of your TV.

-If there is one audio input jack on the TV, connect it to the LINE OUT AUDIO OUT Left (white) jack of the DVD- VCR.

-If you press the P.SCAN button when the DVD-VCR is in Stop mode or no disc is inserted, the Alt Video Out (see page 54 to 55) mode changes in the following sequence: (S-Video - Interlace - Progressive)

-When you connect an external device (STB or VCR) and play it through the LINE IN 1 jack of the DVD-VCR, you can still see the display on your TV set although the DVD-VCR set has been turned off.

ENG-17