Samsung DVD-VR325P, DVD-VR325/XEF manual Connecting Video Cable, Progressive Scan

Connecting the	Connecting the
S-Video Cable	Component Video Cable

Connections

You will enjoy high quality images. S-Video seperates the picture element into black and white(Y) and colour(C) signals to present clearer images than composite video output mode.

1	Connect one end of the S-Video cable into the
	S-VIDEOoutput jack on the rear of the DVD

Recorder & VCR.

2 Plug the other end of the S-Video cable into the appropriate input connector on the television.

3 Connect one end of the audio cable supplied into the AUDIO output jacks on the rear of the DVD Recorder & VCR.

• Take care to respect the colour coding of the left and right channels.

4 Plug the other end of the audio cables into the appropriate input connectors on the television.

You will enjoy high quality accurate colour reproduction images. Component video seperates the picture element into black and white(Y), blue(PB), red(PR) signals to present most clear and clean images.

1	Connect Component video cables between the
	COMPONENT VIDEO OUT jacks on the rear of

the DVD Recorder & VCR and COMPONENT VIDEO IN jacks on the rear of the TV.

2 Connect audio cables between the audio output jacks on the rear of the DVD Recorder & VCR and AUDIO IN jacks on the rear of the TV.

• Take care to respect the colour coding of the up and down channels.

• Press the input selector on your TV remote control until the Component signal from the DVD Recorder & VCR appears on your TV screen.

COMPONENT INPUT

❚Progressive Scan

Your TV must support progressive scan input to allow to watch progressive scan component video out.

18 - English