Samsung DVD-VR325P, DVD-VR325/XEF manual Content Protection for Recordable Media Cprm

Concerning Copy Control Signals

TV broadcasts that contain copy control signals may have one of the following three signal types, Copy-Free, Copy- Once and Copy-Never. If you want to record a copy-once type programme, use DVD-RW with CPRM in VR Mode and DVD-RAM.

	Copy-Free	Copy-Once	Copy-Never
DVD-RW (Ver.1.1)	O	-	-
DVD-RW (Ver.1.1)
with CPRM
VR mode	O	O*	-
V mode	O		-
DVD-R	O	-	-
DVD-RAM (Ver.2.0)	O	O*	-

Once Copy Once has been recorded, additional record- ing cannot be performed.

This * marked parts are compatible with CPRM.

-Content Protection for Recordable Media (CPRM)

CPRM is a mechanism that ties a recording to the media on which it is recorded. It is supported by some DVD recorders, but not by many DVD players.

Each blank recordable DVD has a unique 64-bit media ID etched in the BCA. When protected content is recorded onto the disc, it can be encrypted with a 56- bit C2 (Cryptomeria) cipher derived from the media ID. During playback, the ID is read from the BCA and used to generate a key to decrypt the contents of the disc.

If the contents of the disc are copied to other media, the ID will be absent or wrong and the data will not be decryptable.

3 Press the PROG/TRK ( / ) buttons or number buttons to select the station you want to record.

4 Press the REC SPEED button repeatedly, to select the recording speed (quality).

•XP (High, approx. 1 hour) ➝ SP (Standard, approx. 2 hours) ➝ LP (Low, approx. 4 hours) ➝ EP (Extended Play, approx. 6hours/8hours)

-RW

XP Recordable Time 02:08

5 Press the REC button.

•“ ” or “Record” is displayed on the screen and recording begins.

6 Press the STOP button to stop or finish a recording in progress.

• The message “Updating the information of disc.

Please wait for a moment” is displayed.

❚ Pausing / Resuming

• Press the REC PAUSE button to pause a recording

Recording

Recording the current programme you are watching

in progress.

• Press the REC PAUSE button again during pause to

resume recording.

• You can switch channels by pressing the

PROG/TRK ( / ) buttons while recording

pauses.

1.Check the antenna cable is connected.

2.Check the remaining time on the disc.

DVD-RAM/-RW discs should be formatted in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording.

Press the OPEN/CLOSE button and place a recordable

1 disc on the disc tray.

Press the OPEN/CLOSE button to close the disc tray.

2 Wait until LOAD disappears from the front panel display.

Note

■ You can not change the recording mode and the programme while recording.

■Recording will stop automatically if there is no free space left for recording.

■Up to 99 titles can be recorded onto a disc.

■If the power interrupted due to power failure or other reasons, the title being recorded will not be saved onto the disc.

■Recording will stop automatically if a copy protected image is selected.

■Do not use DVD-R authoring discs with this unit.

58 - English