Samsung DVD-VR325P, DVD-VR325/XEF manual Maximum Recording Time SP vs. LP, Pausing / Resuming

Maximum Recording Time - SP vs. LP

Tape Length	Recording Time (in SP)
E180	180 mins or 3 hours
E240	240 mins or 4 hours
E280	280 mins or 4 hours and 40mins
E300	300 mins or 5 hours

Special Recording Features

While a recording is in progress, you can watch

a different channel, watch a different media, or add recording time in 30-minute increments.

Note

When you watch or record on the VCR during DVD Recording, some function buttons may not operate.

The message “This function is not available.” will be displayed.

1 Watch a Different Channel

When you watching through the Antenna input during recording, press the TV/VCR button on the remote control. Change the programme you want to watch.

4 Press the (REC) button on the remote control or front panel.

For options while recording is in progress, see “Special Recording Features”.

5 Press the STOP button to stop or finish a recording in progress.

❚Pausing / Resuming

•Press the REC PAUSE button to pause a recording in progress.

•Press the REC PAUSE button again during pause to resume recording.

•You can switch programme by pressing the PROG/TRK ( / ) buttons while recording pauses.

ecordingR Check Remaining Time

1	Press INFO. button on the remote control.
	Following information will be displayed.
	(Current deck status, recording speed, remaining
	time, input channel, current time.)
		RAM	VCR
		Stop	Stop
		0:00:02	0:00:03
		SP	SP
		Rem 06:07	Rem 05:41
		AV2	PR 1
		Sat 22 Jan. 2005	14 : 01

When you watching through AV input during recording, change the input of your TV from AV to Antenna. Change the programme you want to watch.

2 Watch a different media during recording You can watch a DVD during VCR recording or watch a Video tape during DVD recording.

•During VCR recording, insert a DVD in the DVD deck. The output will automatically change to the DVD and start playback.

•During DVD recording, insert a Video tape in the VCR deck. The output will automatically change to the VCR and start playback. (Only if tape is missing the safety tab)

3 Add Recording Time

Refer to the One-Touch Recording (OTR). (See page 60)

4 Recording DVD and VCR at the same time You can record DVD and VCR at the same time, but both modes must be set up to record separately.

•Press the DVD/VCR button to set the unit to DVD or VCR mode.

•Choose input mode (PR, AV1, AV2, AUX or DV). for DVD or VCR.

•Choose REC SPEED mode for DVD or VCR.

•Press REC button for DVD or VCR.

When DVD Recorder & VCR is connected to Note your TV using S-Video or component video

cable, the playback screen on the video tape will not display during DVD recording.

You cannot record different channels at the same time.

The DVD and VCR cannot start recording at the exact same time. You must set one mode to start recording, then the other.

66 - English