Samsung DVD-VR325P, DVD-VR325/XEF manual Making a One Touch, Recording OTR, To stop recording

Making a One Touch	Making a Timer
Recording (OTR)	Recording

Recording

One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 9 hours by pressing the REC button.

1 Press the PROG/TRK ( / ) buttons or number buttons to select the station to record.

If you want to record through a connected external component, press the INPUT SEL. button to select an appropriate external input (AV1, AV2, AUX or DV).

2 Press the REC button.

3 While in Record mode, press the REC button again to activate One-Touch Recording (OTR).

•Record length 0:30 appears on the On-Screen Display and the DVD Recorder & VCR will record for exactly 30 minutes.

4 Continue pressing REC button to add recording time in 30 minute increments up to 9 hours.

•The DVD Recorder & VCR stops recording automatically when the time has elapsed.

❚To stop recording

Press the STOP ( ) button.

The message “Press STOP button once more to cancel Timer Record” is displayed.

Press the STOP ( ) button again.

The message “Updating the Information of disc. Please wait for a moment” is displayed.

■ The timer counter decreases by the minute from 9:00 to 0:00, then the DVD Recorder &

Note VCR stops recording.

1.Check the antenna cable is connected.

2.Check the remaining time of the disc.

3.Check the date and time are correct.

Make sure the Clock (Setup-Clock Set) must be set before you proceed with a timer recording.

(See page 24)

1 Press the OPEN/CLOSE button, and place a recordable disc on the disc tray.

2 Press the OPEN/CLOSE button to close the disc tray.

Wait until LOAD disappears from the front panel display.

3 With the unit in Stop mode, press the MENU button.

4 Press the …† buttons to select Programme, then press the OK or √ button.

DVD-RAM(VR)		Programme
Disc Navigation	ShowView		√
Playlist	Standard Timer		√
Disc Manager	ShowView Extended	: Off	√

Copy

Programme

Setup

MOVE OK RETURN EXIT

5	Press the …† buttons to select the Standard
	Timer, then press the OK or √ button twice.
	• The Timer Recording screen is displayed.

DVD-RAM(VR)					Scheduled Record List
No.				No. 01					Edit
01									√
02	To	PR	Day	Start		End	Speed	V/P	√
03
									√
04	DVD	01	SAT01	11:00		13:00	SP	Off	√
05			Recordable Time 01:23 SP						√
06									√
	MOVE		OK			RETURN		EXIT

60 - English