Starting the recording mode

Things to watch out for using the ASR mode1.The digital zoom will not operate in the ASR mode.

2.If the lighting condition is brighter than fluorescent lighting condition, the ASR will not activate.

3.If the lighting condition is darker than in fluorescent lighting condition, camera

shake warning indicator ( ) will display. For best results only take pictures

in situations where the camera shake warning indicator ( ) is not displayed.4.If the subject is moving, the captured image may be blurred.

5.Avoid moving the camera while the [Capturing!] message is displayed to achieve a better result.

6.As the ASR uses the camera's digital signal processor, it may take a little longer for the camera to process and save the images.

7.The ASR function will not operate with image size.

Wise Shot

2 images are taken at a time. One is taken in the Fill-In Flash mode and the other is taken in the ASR mode.

How to use the Wise Shot1.Select the ASR mode by rotating the mode dial and press the +/- button.2.Select Drive menu tab by pressing the Up and Down button.

3.Select the Wise shot menu by pressing the Left and Right button. And then press the OK button.

4.Press the Shutter button to capture images.-Two images are captures sequentially.

INFORMATION

In the Wise shot, the shutter speed value shown on the LCD may be different from the real shutter speed.

Wise Shot function is not available on D75/D70.

16