Samsung D70 SAMSUNG D70 [ Selecting Video out type ], [ Formatting a memory ], Setup 2 ( ), Sub menus, Connecting to an external monitor

Setup 2 ( )

[ Selecting Video out type ]

The Movie output signal from the camera can be NTSC or PAL.

Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.

[ Formatting a memory ]

This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory.

Connecting to an external monitor

When the camera is connected to an external monitor in the recording mode or play back mode, the image (movie or still image) will be visible on the external monitor and the LCD monitor of the camera turns off.

SETUP2
Quick View
Power Off
LCD Save
Video Out		NTSC
Format	PAL
Reset
 Back		OK Set

Sub menus

[No] : The memory will not be formatted. Press the menu button three times and the menu display will disappear.

[Yes] : A [Processing!] message appears and the memory will be formatted. If you run FORMAT in Play mode, a [No Image!] message will appear.

SETUP2
Quick View
Power Off
LCD Save
Video Out
Format		No
Reset		Yes
 Back		OK Set

Be sure to run [Format] on the following types of memory card.

Yellow - Video

White - sound

36

-A new memory card, or an unformatted memory card

-A memory card that has a file this camera can't recognise or one that has been taken from another camera.

-Always format the memory card using this camera. If you insert a memory card that has been formatted using other cameras, memory card readers, or PCs, you will get a [Card Error!] message.