Setting up the application software
5.After restarting the computer, connect the PC to the camera with the USB cable.
6.Turn the camera power on.
The [Found New Hardware Wizard] will open and the computer will recognize the camera.
If your OS is Windows XP, an image viewer program will open.
If the download window of Digimax Master opens after starting Digimax Master, the camera driver was setup successfully.
Starting PC mode
In this mode, you can download stored images to your PC through the USB cable.
The LCD monitor is always turned off in PC mode.
Connecting the camera to a PC
1. Connect the PC to the camera with the USB cable.
Select USB
2. Select the [Computer] menu.
Computer
Printer
INFORMATION
If you have installed the camera driver, The [Found New Hardware Wizard] may not open.
On a Windows 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify "USB Driver" in the CD supplied.
If you selected [Printer] in Step 2, when you connect the camera to your printer, the [Connecting Printer] message will display and the connection will not be established. In this case, disconnect the USB cable, and then follow the procedure from Step 1 and onward.
113