Setup menu 2
[ Calibration]
This menu will increase the sensitivity of the Touch Pen. Press the Touch Point on the LCD monitor with the Touch Pen.
Setup 2 |
| Setup 2 / Calibration |
|
|
|
[ Selecting Video out type ]
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI.
Setup 2 |
|
|
| Video Out |
|
|
|
|
|
Video Out
Quick View |
0.5sec |
NISC
NTSC
Power Off |
|
3min |
|
LCD Save |
|
Off |
|
Calibration | Touch |
|
| After pressing the Touch Point three times, the |
| Setup 2 / Calibration | |
|
| menu is set and |
|
|
|
Touch
When you calibrate the LCD monitor, press the Calibration point exactly or menus on the LCD monitor won't be selected or set.
Format |
| PAL |
|
|
|
Reset
Connecting to an external monitor
When the camera is connected to an external monitor in the play back mode, the image (movie or still image) will be visible on the external monitor and the LCD monitor of the camera will turn off.
When connected to an external monitor, some functions are not available.
Yellow - Video
White - sound
87