Samsung EC-NV40ZSBA/IT, EC-NV40ZBBA/FR Imprinting the recording date, Copy To Card, Setup menu

Setup menu ( )

Imprinting the recording date

There is an option to include DATE / TIME on still images.

Setup menu ( )

Copy To Card

This enables you to copy image files, movie clips and voice recording files to the memory card.

- Sub menus
[Off]	: The DATE & TIME will not be	Off	File
	imprinted on the image file.
		Date	Self Portrait
[Date]	: Only the DATE will be imprinted	Date & Time	AF Lamp
[Date&Time]	on the image file.		Quick View
	: The DATE & TIME will be		Imprint
	imprinted on the image file.		Exit:BACK

[No]	: Cancels “Copy to Card”.
[Yes]	: All images, movie clips and voice
	recording files saved in the internal
	memory are copied to the memory
	card after the [Processing!] message is
	displayed.

No  Copy to Card

Yes Delete All

Format

Exit:BACK

h The Date & Time are imprinted at the bottom right side of the still image. h The imprint function is applied only to still photos except for the photos

taken in the [TEXT] scene mode.

h Depending on the manufacturer and print mode, the date printed on an image may not be printed correctly.

<<70 >>

●When this menu is selected without inserting a memory card, you can select the [Copy To Card] menu but the menu can’t be run.

●If there is not enough space available in the memory card to copy saved images in the internal memory (20MB), the [Copy To Card] command will copy only some of the images and display [Memory Full!] message. Then the system will return to the playback mode. Please be sure to delete any unnecessary files in the internal memory to free up space before inserting the memory card into the camera.

●When you move the images that are stored in the internal memory to the memory card, the next number of file names will be created in the card to avoid duplication of the file name.

-When the [Reset] of the [File] setup menu is set : The copied file names start from after the last stored file name.

-When the [Series] of the [File] setup menu is set : The copied file names start from after the last captured file name. After completing [Copy To Card], the last stored image of the last copied folder is displayed on the LCD monitor.