Connecting to a Power Source
Insert the battery as shown- If the camera does not turn on after you have inserted battery, please check whether the
battery (+ /- When the battery chamber cover is opened, do not force the battery chamber cover, this may damage it.
There are 4 indicators for battery condition that are displayed on the LCD monitor.
Battery |
|
|
|
| |
indicator |
|
|
|
| |
|
| Low battery | Low battery | Battery empty. | |
Battery | The battery is | capacity | capacity | ||
(Recharge or | |||||
(Prepare to | (Prepare to | ||||
status | fully charged | use spare bat- | |||
recharge or use | recharge or use | ||||
|
| spare battery) | spare battery) | tery) | |
|
|
|
ÄWhen using the camera and the battery in a place that is excessively cold or hot, the battery status on the LCD may be different from the actual battery status.
Inserting the memory card
Insert the memory card as shown.- Turn off the camera’s power before inserting the memory card.
- Have the front of the memory card facing toward the back of the camera (LCD monitor) and the card pins toward the front of the camera (lens).
-Do not insert the memory card the wrong way round.Doing so may damage the memory card slot.014