Starting the Multi Slide Show ( 
)
Images can be displayed continuously at pre-set intervals.
You can view the Multi Slide Show by connecting the camera to an external monitor.
1.Press the play mode button and press the MENU button.
2.Press the Up / Down button and select the [Multi Slide Show] menu tab and press the OK button.
Start the Multi Slide Show
The Multi Slide Show can start only in the [Start] menu.
1.Use the Up / Down button to select the [Start] menu and press the Right button.
Selecting Images
You can select image to view |
|
|
| |
1. Use the Up / Down button to select the | Start |
|
| |
[Images] menu and press the Right | Images | All :All |
| |
button. |
| Interval | Date:1 sec |
|
| Music | :Off |
| |
2. Select a desired sub menu by pressing |
| Select |
| |
Effect | :Off |
| ||
the Up / Down button. |
| |||
|
|
| ||
[All] | : All images saved on the |
|
|
|
Back | Set | |||
|
|
| ||
| Memory are played back. Press the OK button to | |||
| save the configuration. |
|
|
|
[Date] | : Images taken in a specified date are played back. | |||
2.Select a desired sub menu by pressing the Up / Down button.
[Play] : The Multi Slide Show is closed after one cycle.
[Repeat] : The Slide show is repeated until cancelled.
Start | Play |
|
|
| |
Images | :All |
|
| Repeat |
|
Interval | :1 sec |
|
Music | :Off | |
Effect | :Off | |
|
|
|
Back | Set | |
Press the OK button to save the configuration. [Select] : Play only the selected images. The selected image
can be saved as [Select1], [Select2] and [Select3]. If you save the selected image with the [New Select] command, it will be saved as [Select1]. But when a new image is saved again using [New Select], the former image which had been saved as [Select1] will
3.Press the OK button and the slide show will be started.
-To pause the slide show while playing it back, press the OK button again.
-Pressing the OK button again will cause the Multi Slide Show restart.
-To stop playback of the Multi Slide Show, press the OK button, and then press the Left or Right button.
be saved as [Select2] automatically.You can change and cancel the images which were saved as [Select1], [Select2] and [Select3]. Press the Fn button to save the configuration.
3.Select [Play] or [Repeat] in the [Start] menu to start the multi slide show.
81