ç Contents

ç Chapter Contents

222

• You can connect to computers that you have already connected to by choosing them on the [Select a Device] screen in step 3.

•If you chose [PIN Method] in step 5, a PIN code will be displayed on the screen. Be sure to set this code in the access point. Choose a device in the [Select a Device] screen. For further details, refer to the user guide included with your access point.

•To add multiple computers, repeat the above procedures starting from step 1.

•To disconnect from the camera, turn off the camera.

•After you have accessed the Wi-Fi menu once, you can access it again by pressing the <o> button. The recent target device is listed first, so you can easily connect again by pressing the

<o><p> buttons to choose it. To add a new device, display the device selection screen by pressing the <q><r> buttons, and then configure the setting.

If you prefer not to display recent target devices, press the

<n> button, and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].

Connecting to Access Points in the List

1View the listed access points.

zzView the listed networks (access points) as described in steps 1 – 3 of “Adding a Computer” (=219).