ç Contents

 

 

ç Chapter Contents

295

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ELPH 130 IS

IXUS 140

ELPH 120 IS

IXUS 135

 

Wi-Fi

 

 

 

 

 

 

 

 

Connection failed

•No access points were recognized. Check the access point settings (=218).

•A device could not be found. Turn the camera off and on again, and retry the connection.

•Check the device you want to connect to and make sure it is ready for connection.

Cannot determine access point

•The WPS buttons on numerous access points were pressed simultaneously. Try reconnecting again.

No access points found

•Check to make sure that the access point is turned on.

•When connecting to an access point manually, make sure that you entered the correct SSID.

Incorrect Wi-Fi encryption key/Incorrect Wi-Fi security settings

•Check the access point security settings (=216).

IP address conflict

•Reset the IP address so that it does not conflict with another.

Disconnected/Receiving failed/Sending failed

•You may be in an environment where Wi-Fi signals are obstructed.

•Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth devices, and other devices that operate on the 2.4 GHz band.

•Bring the camera closer to the other device you are trying to connect to (such as the access point), and make sure there are no objects between the devices.

•Check the connected device to make sure it is not experiencing errors.