ç Contents

ç Chapter Contents

207

XXWhen you have connected to the Web service, the image transfer screen will be displayed. Proceed to “Sending Images” (=230). However, when [Send via Server] is selected, images will be sent as soon as a connection is established (=234).

•When you are in the vicinity of an access point that you have previously connected to, the camera will automatically connect to it in step 2. To change access points, select [Switch Network] from the screen that will be displayed when the connection is being established, and follow steps 4 – 5 in “Adding a Computer” (=219).

•After you have accessed the Wi-Fi menu once, you can access it again by pressing the <o> button. The recent target device is listed first, so you can easily connect again by pressing the

<o><p> buttons to choose it. To add a new device, display the device selection screen by pressing the <q><r> buttons, and then configure the setting.

If you prefer not to display recent target devices, press the

<n> button, and on the [3] tab, choose [Wi-Fi Settings] > [Target History] > [Off].