Samsung GH68-22565A To look up information for a specific contact, In standby mode, press

To look up information for a specific contact:

1.In standby mode, press

and hold to launch VoiceSignal.

“Say a Command” appears in the display

and is pronounced through the speaker.

2.Say “Lookup”. VoiceSignal prompts you to “Say the name.”

3.Speak clearly and say the full name of the person you want to call, exactly as it is entered in your Contacts list.

•If VoiceSignal recognizes the name you said, the Contact entry information for that name appears in the display.

•If VoiceSignal does not recognize the name you said, a choice list of up to three names appears in the display, and VoiceSignal prompts you with “Did you say?” followed by the first name on the list.

4.Say “Yes” to confirm the name or “No” to hear the next name, or use the keypad to select the correct name from the list. (For more information, refer to “Choice Lists” on page 96.)

•To say the name again, press Repeat.

•To exit VoiceSignal without dialing, press Settings and press Exit.

5.The contact information for the name you selected appears in the display.

•To dial the default number associated with the name,

press .

•To remove this entry from

your Contacts list, press the Erase soft key.

•To add or change information for this entry, press EDIT ().

•To access the following options, press the Options soft key.

–Send Txt Msg — Create and send a text message to the selected Contact.

–Send Pic Msg — Create and send a picture message to the selected Contact.

–Call — Dial the number associated with the Contact name.

Understanding Your Contacts 38