Understanding Your Contacts 38
To look up information for a specific contact:
1. In standby mode, press and hold to launch
VoiceSignal.
“
Say a Command
” appears in the display and is
pronounced through the speaker.
2. Say “
Lookup
”.
VoiceSignal prompts you to “
Say the name.
”
3. Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your Contacts list.
•
If VoiceSignal recognizes the name you said, the Contact entry
information for that name appears in the display.
•
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “
Did you say?
” followed by the first name on the list.
4. Say “
Yes
” to confirm the name or “
No
” to hear the next
name, or use the keypad to select the correct name from
the list. (For more information, refer to “Choice Lists” on
page93.)
•
To say the name again, press
Repeat
.
•
To exit VoiceSignal without dialing, press
Settings
and press
Exit
.
5. The contact information for the name you selected appears
in the display.
•
To dial the number associated with the name, press .
•
To remove this entry from your Contacts list, press the
Erase
soft
key.
•
To add or change information for this entry, press
EDIT
().
•
To access the following options, press the
Options
soft key.
–
Send Txt Msg
— Create and send a text message to the selected
Contact.
–
Send Pic Msg
— Create and send a picture message to the selected
Contact.
–
Call
— Dial the number associated with the Contact name.
–
Send Name Card Via Bluetooth
— Send the select Contact’s
information to another Bluetooth device.
Select the desired option.
Quick Search Method
For information on enabling Quick Search,
see “Quick Search” on page112.
1. In standby mode and with Quick
Search enabled, press the first few
numeric keys that correspond to the
letters of the Contact’s name.