Samsung GH68-22573A user manual Answering a Call, In-Use Options Menu, Answering an Incoming Call

•To say the name again, press the Repeat soft key.

•To exit Voice Dial without dialing, press .

Pause Dialing From a Contacts Entry

•If you voice dial a contact that contains (two-second) T pause(s) simply wait for the pauses to pass and the dialing to complete.

•If you voice dial a contact that contains (hard) P pause(s), wait for the appropriate prompt(s) from the number you are calling (credit card number, bank account number, and so on) and enter the appropriate response(s).

Answering a Call

Your phone notifies you of a call in the following ways:

•A ring tone sounds and/or your phone vibrates (Your phone provides seven ring volume settings including: Ringer Off, Vibrate, Low, Low/ Medium, Medium, Medium/High, High, or Vibrate/High, and/or different ring types to distinguish callers.)

•A phone number (unless blocked by the caller) and a name appear in the display (If the caller’s number and name are stored in your Contacts list).

•If the caller can’t be identified, Call from unavailable#, Call from restricted number, or no number appears in the display.

•Your phone continues to notify you of the call until one of the following events occurs:

–You answer the call.

–You ignore the call.

–The calling party ends the call.

–The call is sent to voicemail.

Answering an Incoming Call

▶Open the flip on your phone, if

closed, and/or press . The ring tone and/or vibration stop and the caller’s voice can be heard in the earpiece.

Tip: You can set your phone to automatically answer calls or to answer calls when you press

any key but the key or automatically, as indicated by the Auto

Answer icon ( ). (For more information, refer to “Call Settings” on page 104.)

The In-Use Options Menu

You can access numerous menus and features while in a call.

Note: If the call is disconnected while you are accessing the In-Use Option, the In-Use Option disappears from the display and the phone eventually returns to standby mode.

1.While in a call, press the Options soft key.

23