Panasonic KX-TD308 manual Using a DSS Direct Station Selection button, 74DPT Features

I

4.2DPT Features

Using a DSS (Direct Station Selection) button

1

2

3

4

1.Lift the handset or press the SP-PHONE/MONITORbutton.

2.Press the flexible button which is assigned as the DSS button.

3.Start talking.

4.Hang up or press the SP-PHONEbutton after the conversation is completed.

Conditions

•An extension number and a name, if programmed, are shown on the display PT during an intercom call.

•You can assign a DSS button on a proprietary telephone (PT) through Station Programming.

•After dialing an extension number, you will hear one of the following tones: Ringback tone: Indicates the destination extension is being called. Confirmation tone: Indicates you can perform voice calling (e.g. Paging). Busy tone: Indicates the destination extension is busy.

Do Not Disturb (DND) tone: Indicates the destination extension has set the “Do Not

Disturb (DND)” feature.

Programming References

• Station Programming (Section 2)

Flexible CO Button Assignment — Direct Station Selection (DSS) Button

(System Programming — [005] (Installation Manual) can be used for this assignment.)

•User Programming (Section 3) / System Programming (Installation Manual)

[003]Extension Number Set

[004] Extension Name Set

4-74DPT Features