Panasonic KX-TD308 manual Conditions, 12DPT Features

A

4.2DPT Features

Entering account codes during or after a conversation

1

2

During a conversation or while hearing a reorder tone after the other party hangs up (within 15 seconds);

1. Press the flexible button which is assigned as the Account button.

•The corresponding indicator lights when using the Account button.

•You can keep talking.

account code and #

2.Enter the account code and #.

•The corresponding indicator light turns off when using the Account button.

Conditions

•In Verified - All Calls mode, you must always enter a pre-assigned account code when making any of the following calls unless it has previously been stored in memory.

a)Call Forwarding — to Outside Line

b)Manual Dialing (Selecting an outside line)

c)One-Touch Dialing

d)Pickup Dialing (Hot Line)

e)Redial, Last Number

f)Redial, Saved Number

g)Station Speed Dialing

h)System Speed Dialing

•In Option mode, it is possible to record a calling or called party’s account code in the SMDR, during a conversation or within fifteen seconds after the other party hangs up.

•There is no need for an account code entry when receiving incoming calls.

•Pressing “ ” while entering an account code allows you to clear the number and re- enter.

•Pressing the flexible button assigned as the Account button while entering an account code cancels the entry.

•An account code can be up to ten numeric digits (0 through 9). FLASH or FLASH/RCL, PAUSE, etc. are not allowed. After entering an account code, the delimiter “#” or “99” must be entered.

•An account code can be stored into Memory Dialing (“One-Touch Dialing”, “Pickup Dialing (Hot Line)”, “System/Station Speed Dialing”, “Call Forwarding — to Outside Line”). The sequence to enter an account code into Memory Dialing is as follows:

—[Feature Number] [Account Code] [#] [Line Access Code] [Phone Number]

or

— [Feature Number] [Account Code] [99] [Line Access Code] [Phone Number]

4-12DPT Features